Useful content

Best concrete admixtures cheaper 350 rubles for special strength, frost resistance, the acceleration of hardening, corrosion

It would seem, what to improve concrete quality, when in its production all the rules and designed the main fillers (sand, cement, gravel, water) were observed. Just a man accustomed to all improve. It is possible to make a concrete mix better. Tell us about the best additive in concrete, which can be useful to builders.

Additives can enhance the strength, ductility, cold resistance, protection from salt water resistance, crack resistance and the like. D.

Photo: beton-house.com/wp-content/uploads/2017/11/stabiliziruyuschie-modifikatory.jpg
Photo: beton-house.com/wp-content/uploads/2017/11/stabiliziruyuschie-modifikatory.jpg

Accelerators, retarders

The solution was grasped for 7-12 hours. And finally freezes for about 27 days. Sometimes it is necessary to increase or reduce the setting time. Therefore, many people use accelerators and retarders for concrete. Such additives are sold in stores as a powder.

At long transport solution is added into a concrete retarder. For pouring monolithic plate without cracks and joints as well add hardening retarder.

plasticizers

The primary purpose of the plasticizer - improving the plasticity of the solution. Additives are resistant to frost cracking, increased density, strength (25%), the mobility, the flowability of the mixture. If you use plasticizers, it is possible to save on cement by 15%. The pouring can be carried out even at low temperatures. Best plasticizer C-3. This additive has better plasticizing effect.

Cheap plasticizers: PVA glue, lime or egg white.

There is a small minus plasticizers - reducing setting time. But this can be avoided by adding hardening accelerator. Therefore, builders often added immediately two additives (plasticizer and hardening accelerator). At temperatures below plus 1 degree plasticizers should be used with antifreeze.

reinforcement corrosion

A photo:
A photo: dockermsk.ru/wp-content/uploads/2017/04/chem-ubrat-rzhavchinu-s-armatury.jpg

Reinforcement for reinforcing concrete corrode. Is on sale special additives - corrosion inhibitors. From the surface of the metal inhibitors form a protective film. Introduction to additive solution allows concrete to harden even at low temperatures. Increases the mobility of the mixture is reduced and the diffusion permeability of concrete.

Air entraining agents

Photo: ptk-granit.ru/wp-content/uploads/2018/009-penobeton-672x803.jpg
Photo: ptk-granit.ru/wp-content/uploads/2018/009-penobeton-672x803.jpg

Additive creates tiny pores in the solution. These microscopic pores increase frost resistance concrete.

Less additive - reduction in strength. Therefore, many enhance frost resistance by reducing the water-cement ratio or fly ash is added to the solution.

Liquid glass

The additive in the cement slurry increases the strength of the concrete. This composition hardens quickly, has good waterproofing. Frozen becomes concrete monolith.

Photo: stroi-specialist.ru/wp-content/uploads/2016/12/Zhidkoe-steklo-9.jpg
Photo: stroi-specialist.ru/wp-content/uploads/2016/12/Zhidkoe-steklo-9.jpg

Liquid glass treated surface of the concrete. This improves the fracture resistance from moisture. The small price of the material - is also a plus.

Channel RemontDom - subscription. Important: Put Like - thank you!
Selection of an alternative energy source

Selection of an alternative energy source

Many believe that cheaper heating the house is only possible on the main gas. But what if it is n...

Read More

Proper planting carrot: effective method to increase the germination and harvest

Proper planting carrot: effective method to increase the germination and harvest

Hi, gardeners! The theme of today's publication - literate planting carrot seeds. Harvest, thanks...

Read More

How to build houses in Norway

How to build houses in Norway

Many of the users FORUMHOUSE heard that build Norwegian house - first means to build a house on n...

Read More