We cut the bottle and do hodgepodge

I had already tried to cut Little goblets and something happened. One of them is shown in the picture, along with a bottle to be cut. This time it was thought of here that's brushed and grooved bottle cut a hodgepodge with a cover, but the cover to Unfortunately it did not work, because the bottle during the second cut burst in the hands, but still solyanka there is!

Cutting used the most-the most primitive machine with screws fixed glass cutter.

The bottom of the bottle when cutting depended on the side bar, and the glass cutter only protrudes slightly beyond the plane of the longitudinal slats. A line around the circumference of the reliability spent twice, though one would be enough.

Further prepared bucket of cold water and pulled gas burner.

Warmed bottle scrolling it, directing the flame tangentially and slightly off to the side, which then had to be discarded. So the likelihood of unnecessary cracks on the right side is reduced. Above gas cooker Warming also tried, but normally cut It did not always, but it turned out.

After dipping the bottles in hot water went easy crackling. Then a breakaway circular part easily separated by hand. Small irregularities in the bag of the future and the sharp edges still had to be sanded.

The second part of the bottle with the neck, as you already understood, then crumbled.

Used for grinding drill with sanding attachmentTo which cling petals grit P80Although initially better even bigger, and finally leveled P400. For the treatment of the inner edge of halophytes useful normal bar for sharpening knives.

All Grinding mugs and bar during operation better wet and washed as glass dust from the lungs is not output.

It is a pity that with the lid left puncture, but will serve until such later something anyway come up. For me, this thing more convenient than solyanka with small holes. In a spoon and you can climb up and cucumber fingers omit and take. I have already begun to use.

Hesitate evaluate material andsign upCanal.

ANDit is interesting:

A simple repair burned-out LED-lamps. Still serve!

Nozzle hammer with additional fixing wedge

How easy to drag a chair. Forward!