Secrets of grinders: Chain drive on a tree, the experiment with the CD, instead of drill grinders

Bulgarian - the right tool for the home. The tool can cut wood, metal, tile, stone and concrete. It is possible to strip the metal from rusting. This is a simple isntrument has become popular because it is easy to work with and it is universal.

When working with grinder handle should be on top. Many turn it sideways. But this is wrong. The vertical arrangement of the handle safest position FIR work. For grinding using the side handle location.

When the watch on the edge of the disc grinder. If there is at least a little cleavage, the disc may break and scatter to the sides.

chain drive

There are discs for grinders, which are coated with diamond material. But for wood do not use them.

Some make the chain drive for the wood grinders. This device consists of two parts: a chain of chainsaws and the solid circle. The width of cut of about 8 mm.

Drive costs about 600 rubles. Can be discharged from an online store. But it can be made independently. However, working with the grinder must always be mindful of security. Wear goggles, gloves, protective clothing.

CD into grinder

What happens if an instrument to establish a CD? Will it cut? Just say: this is very dangerous, because the disk may crack and pieces scatter apart. Bulgarka operate at very high speed. It is better not to repeat. We just show what would come of it.

So, fasten the drive to the grinder. Try to cut foam, PVC panel - perfect cuts! We try to cut the tree. Drive fast melts, however, cuts wood, leaving a molten material.

Drill grinder instead

It so happens that there are at hand the necessary tools - grinders. You can use a hand saw, but it is long and requires effort. Solution: You can use a drill instead of grinders. But this is not a call to action. We simply offer a way out. Be sure to observe the safety precautions.

For this purpose, it is not necessary to use a powerful drill. Even a weak tool to cope with the problem (for example, a drill 520 watts.). Take care that the drill is not overheated, take a break at work. It will take the same bolt, 2 washers, nuts. We put in the drive bolt, washer and put on a fix, tighten the nuts. Everything works fine, you can cut it fast metal.

Cut down on the metal turns smooth. This method is useful in a pinch when you need it - then cut it, but there is no Bulgarians at hand.

Channel RemontDom: SUBSCRIPTION. Place Like - thank you very much!