Dismantling of the wooden floor planks of solid pine

It's no secret that the pine tree and noble ideal for laying floors, but there is a caveat too soft pine. Therefore, deformation easily attached under reproducible action on it (for example: heavy things falling or moving furniture). Dismantling the same is an operation that is fraught with greater risk of deformation.

And when viewed from the floor, we saw all his faults (chips, scratches), and then decided to dismantle.

To disassemble the flooring of solid pine we need tools such as:

• electric drill.
• claw hammer.
• awl.
• chisel.
• set which includes cruciform bits for extracting screws.
• hammer, pliers and wire cutters.

Dismantling the floor: the order of execution of works

His works we will begin with the dismantling of the last board.

This will help us a chisel and a hammer.

With a chisel, carefully remove the plaster on wood that hides from us the bonnet fasteners. After purification of filler, awl cleans head fastener, in this case, self-tapping screws. After cleaning safely remove the screws out of the board using a drill and the nozzle.

However, in exceptional circumstances there are such situations that we can not remove the screw from the fixing points.

Not a problem, the solution is always there.

In order to remove the "nasty" screw, we cut four sides are not large groove around the screw. Then picks up his hat tightly forceps (pliers) and extract the screw (slowly twisting it counterclockwise). And everything is solved the problem. Screw removed.

Further, by removing all fixing elements can begin to remove themselves boards.

In this case, our friend will be a claw hammer. For accurate removal of the floor, we will need a little lift one edge of the board and pull up, and then to the side.

At a later stage, work with boards will have simple and quite similar.

• remove the fastening elements in the ridge board
• We raise a claw hammer board.
• hands remove the board from its place.
• We add up the board to the side so as not to interfere with the continuation of work.

Small nuances in the work, but important:

• no wonder they say "The first pancake is always lumpy." So it is with the removal of the first board may have little difficulty.
• in progress may not always be able to easily get rid of fasteners (screws, screws, etc.), so you have to make an extra effort. Tinker with wire cutters and a screwdriver that would pick up the hat of the fastening element and get rid of unwanted continue working screws.

Output:

This type of floor dismantle the power of the master, and the average person has no skill of the builder.

At first glance, the work is simple, but any work requires accuracy, patience and the desire to get the final positive result.

Thank you for reading this article!

Your Like (+ or -) and comment (positive or not) is very valuable to us! Thanks to you, we realize that we are moving in the right direction.

Photo courtesy presented site http: dveridlyasaunalmaty.kz