Produce heat accumulator with their hands - not such a hard task
Ease of use, financial savings in the application of the storage tank caused a high the popularity of this design among those who think about the most efficient heating methods private house. Feature of which characterizes heat accumulator is a gradual accumulation of heat at the main boiler heating, which after switching off the room temperature is maintained by the fluid heated within the housing design.
Today, trade, the company offers a number of varieties of the storage tank. they all meet the safety requirements and can significantly save money on heating of private homes. However, the independent production of this device under the force of even the novice master: enough Adherence to the proposed instructions below and attention to each step to create with their own hands reliable heat accumulator.
Understanding the heat accumulator device
Heat accumulator for heating boilers has the following main structural parts:
- metal container (barrel) of a large size;
- a heater layer, laid on the outer surface of the container and for storing the liquid contained inside the barrel temperature;
- or serpentine tubes arranged inside the container and designed to heat the fluid (usually liquid is heated in the nighttime, when electricity tariff for use of the minimum).
Also in the tank it has a thermometer for temperature control.
Heat accumulator: the basic steps of independent production
As an important criterion for the effectiveness of the heat accumulator is its volume, then the choice of metal capacity should be considered the most important stage for maximum utility of the element heating systems. Experts recommend to choose tanks volume of 150 liters or more.
Also need the following materials:
- a concrete slab;
- wide tape;
- a heat insulating material: the heat accumulator has a device similar to the structure of household thermos, and maintaining the temperature of the liquid in it is ensured by the good thermal insulation;
- pipes made of copper or heating elements.
manufactured housing placement storage tank - a question the availability of free space in the house or on the enclosed area. A significant amount of it involves a separate room type furnace that does not always correspond to the plan of an apartment house; therefore more advisable to install heat accumulator is dwelling.
assembly process water tank
Drafting drawing for self-assembly of the heat accumulator allows originally imagine and understand all the details of the future design of the unit. The entire manufacturing process consists of several steps, doing that, you can quickly get to the desired device with the specified parameters.
First step - Preparation of the barrels, which consists in its thorough washing and disposal of garbage, sweep areas with signs of incipient corrosion coated with anticorrosion paint.
The second step - Selection and preparation of thermal insulation. This material is designed to provide the highest long-term conservation of liquid temperature, because of its insulating properties should be ideal.
As the insulation is most commonly used mineral wool: it is democratic in terms of price and features long life. It turns the whole thoroughly barrel with the outside, and then this layer is fixed by a wide tape. In order to better maintain the temperature of the fortified mineral wool wrapped sheet metal or foil wrap.
The third step - determination of the type of heating element. They may become heating elements, but this option is not safe to use and has high requirements for installation. Because alternatively coil may be used.
For the self-production of the coil should take copper pipe with a diameter of at least 3 cm. Its length may vary depending on the size of heat storage body: it is generally from 7 to 15 meters. Pipe rolled in a spiral shape and is securely fastened inside the barrel.
Final work It consists in installing the vent pipe at the top of the resulting structure and the nozzle opening in its lower part. Both pipe necessarily provided with taps. After the lower nozzle, water enters the unit, and fitting the top of the storage tank provides heat removal, containment.
Important! It should be remembered that the rules of fire safety of the heat accumulator should be installed on a concrete slab, as far as possible it should be enclosed with walls.
We connect and enjoy!
Now - connection. Self-made heat accumulator is easy to use, safe and economical. However, you should follow some simple rules of its connection to ensure a long operation of the device without any serious damage.
- Through the whole tank must be installed a return conduit, at its two ends respectively to provide required input and output.
- The compound container and boiler return must be made first.
- Between the container and return circulation pump set (it should be located as a shut-off valve, the second side).
- The supply conduit is displayed on the same technology (see. P. 3).
Making the simplest heat accumulator with their hands made it relatively easy and allows save money for heating private houses due to the accumulation of heat energy generated by the main boiler heating.
We hope that the material presented by us will help you to make your home more comfortable, and its heating system more economical. We'll be glad to read your comments, and on this subject.
In the following video, you can learn more information about the storage charging.
Thank you for reading this article!
We appreciate your Like (+ or -) and comment (positive or not) is very valuable to us! Thanks to you, we realize that we are moving in the right direction.