Neyler pneumatic nail gun or just

Assuming that civilization began to develop along the path of biotic, the need for building tools would disappear altogether. Any buildings and facilities up to space rockets could only grow. Today, however, we continue to carefully build their homes using a nail and a hammer. But there is a device such as neyler.

What if the house is to be built in a short time? Rescue replacing the usual hammer his kinsman automatic - pneumatic neyler (nail gun). Despite the existing strong enough electromechanical equipment of this type of air gun has certain advantages. What are they? We try to clarify it for you.

Electromechanical neylery hammer in nails long and 90 mm, but always it is enough. For example, to secure the powerful beams in the construction of a frame house need longer nails. In addition, the rate of nailing plays an unimportant role in the selection of equipment. And air neylera "rate" is much higher, which provides a powerful compressor.

It is promoted above all, the simplicity of the pneumatic tool design:

• By "fire" does not need to be prepared in advance. Powerful compressor motor itself pumps the required volume of air under high pressure into the receiver, which is a large diameter pneumatic hose is delivered to the nail gun.
• neylera pneumatic device is extremely simple. Inside the air cylinder built into the housing under pressure of compressed air moves the piston, which is connected with the striker. A powerful blow to the nail head, firing pin spikes it in the right place. That's all.
• Further, under the action of compressed air firing pin immediately returns to the start position, causing the tool to the ready clogging of the next nail. Now everything depends on the professionalism of the carpenter, the higher it is, the higher the speed.

Everyone knows the role played by its weight when working with hand tools. Present in his hands to lift heavy Nailer, which for a change at a rate you need to score about 10000 nails. At the end of the shift can be no doubt in the absence of your desire to continue further work. In the manufacture of pneumatic neylerov using lightweight aluminum alloys, which makes them quite easily. In this tool weight still depends on its capacity.

It is impossible to overlook the shortcomings when working with pneumatics. First, you need an air compressor. To learn how to pick it up - a separate article. Second, air hose, which makes it difficult underfoot. These disadvantages can be minimized by properly organizing the workplace.

Currently, a large number of manufacturers represented neylerov models that differ in their purpose, the principle of action, power, and the type of used consumables. In this case, almost all of them have common characteristic features, such as the presence of the fuse and control the nailing depth.

Apart from the fact that all neylery are activated by pressing the trigger, nailing is possible in automatic mode, i.e., tapping spout tool in the desired location on the surface is nailed details. Charging Procedure tape or nails drum is not complicated, filing nails are done automatically.

Well, the latter is not less important. This unquestioning adherence to safety when working with these tools. In inexperienced hands, they can become a real dangerous "weapon". Not to be trifled with, and to tempt fate with Pneumatic nailers in their hands.

Be sanity. Be sure to put the pneumatic neyler lock when not working or while carrying it. To reduce the risk nails do not put your hands and feet in the working area. Take care of yourself!

Videos about pneumopistol - neyler

Thank you for reading this article!

Your Like (+ or -) and comment (positive or not) is very valuable to us! Thanks to you, we realize that we are moving in the right direction.