Replacing the sink (siphon)

Typically the drain (siphon) rarely flows sink, but sometimes it happens. It is also the case that the metal walls corroded drain - it is a signal to replace the drain (siphon).

Replacing the drain (siphon) Shell

Step 1. Purchase a drain, which is suitable to your sink.

Step 2. Remove the old sink drain valve.

Step 3. Unscrew the upper nut siphon.

Step 4. Loosen the clamp that connects the rod.

Step 5. Unscrew the lower part of the plum.

Step 6. Remove the upper part from the sink.

Step 7. Wipe down the sink drain hole edge.

Step 8. Place a new gasket in the hole and the hole on the mastic promazhte perimeter.

Step 9. Place the upper part of the drain in the sink hole.

Step 10. Install the sealing gaskets and screw the lower part of the siphon, pull back.

Step 11. Combine with drain siphon and seal plastic nut.

Step 12. Now it is necessary to balance the metal rod, install the clamps and check the operation of the drain.

If the statement was useful to you, please click Like and share articles with friends via social buttons.

Do not scold for photo quality, I hope the essence is clear. If not, ask questions later. Thanks!