Wicker fence made of boards with their hands: the cheapest option fence

To protect your site many people use steel sheet, wood, chain-link fencing, plastic. Fence serves to protect the portion and performs a decorative function. We talk about how to make the fence from boards. Wicker fence has a name - the network. Weave horizontally and vertically.

Pluses braided fence

- Easy installation,

- strength

- fence looks original, interesting,

- in contrast to the trapezoidal sheet, this fence is easily blown.

- a small sail. Wicker fence withstand any wind.

For the construction of the fence will need:

- boards. You can choose any width, but with a narrow will cope better. boards can be up to 6 meters.

- supporting metal poles. The diameter of the pillars must be at least 4 cm.

- rack or racks.

- special. coating composition boards from rot.

- nails, screws.

- cement, sand, a shovel.

First you need to mark where the fence will be held. Pull the rope. Between the posts should be 2 m. Distance depends on the length of the boards themselves.

If you use metal or wooden poles, the foundation for the fence is not required.

Dig a pit under the pillars. Can be pre-primed metal poles. Set in the hole and fill the columns one-third the space with gravel. To fill the remainder of the cement mortar.

Horizontal begin weaving from the racks of boards or beams. Wicker fence made from above. Securing the first and subsequent board of a post, and then it goes around the counter, then the second, and comes at the next post. Boards at the joints with the support struts and fastened with screws.

Supporting columns from top to close the inserts - tips. At the end of the upper board should be fixed (it is not necessary to weave).

Ready fence to cover varnish, lacquer or paint.

Channel RemontDom: SUBSCRIPTION. Place Like - thank you and good luck!