Log houses with their own hands

Log houses may vary in appearance depending on the type of log, log house is:

• from standard round timber;
• produced by the machine - cylindering.

Round logs has the same diameter and height of the groove. When placed within a frame than crowns absolutely horizontal, but always cut the end of the same round.

When manual cutting, the beam in the shape of a truncated cone. Butt - is the lower part of the trunk at the root of the tree, over the top - the top of the trunk. In order to cut the carcass horizontally during stacking rims and apex butt interleaved, wherein a groove along the length varies in size, in the end cut through a different diameter.

With the construction of the wall chopped logs important factor is the presence of a timber of the highest category.

For your home round timber should have:

• round and straight trunks root lumber (cut at the root);
• healthy wood without defects;
• to a minimum of branches on the working length of the log;
• have a small taper (sbeg) barrel - less than 2% per 1 linear meter;

Wood having defects:

• bent stem;
• high taper;
• many knots;

and a second rate lower grade wood intended for timber.

According to GOST 2708-75 "Round timber. the volume of the table. " And also GOST P 52117-2003 "Round timber. Methods of measurement "is defined amount cuttings. Runout, its value roundwood defined in paragraph 2.4. SNP II-25-80 «Wooden structures". All known defects of wood, the terms and definitions given in GOST 2140-81 "Visible defects of wood. Classification,, measurement methods "shows all known defects of wood.

Manual cutting of the wooden house. Kinds.

"Norwegian cabin." Flitches. In this method, the log cutting okantovyvayut from two sides, a trapezoidal cup with flats.

"Canadian cabin" In this process, cutting round timber, cup trapezoidal with flats.

"Russian cutting" In Russia, the most common type of log cabin - "in Oblomov" and "a remnant." "In Oblomov" - is the name of the cabin due to the shape of the log and the cup, "obly" means round, round. "On balance" - when issues of all logs in the wooden house beyond the outer contour of the structure, today it is called sever.

"Swedish logging" log cabin hexagon, cutting overhead thermal slot and cups, cutting "the needle", "paw", etc.

Cuttings from the house of chopped logs. Process.

Production pine harvested in diameter 280 - 360 mm.

Building a house of chopped logs as follows:

Upon completion of the work on the development of the project and obtaining the project value in the production of logs harvested required to build a house of pine logs with a certain diameter.

Okoryayutsya logs by hand and stacked for ventilation and primary drying. logs delivery to the site is carried out on 35-40 m3.Krugloe batches processed Skobelev and ostrozhennoe a plane ready to log manually or with a crane is supplied to the site log assembly.

Next, cut the cup, cut grooves, holes zasverlivayut nog.

Roll out and attach mezhventsovogo jute insulation and finished parts are stacked in the frame. Cutting and assembly of log houses made both on the site and beyond. When cutting off the field, you will need to spend money to put it in the right place.

Of course this is all for your reference. The process of construction of a wooden house is much more difficult. Nevertheless, anything new you have to learn yourself.