How to clean the faucet aerator

Aerator or mixer control jets - a special nozzle is screwed to the end of the spout of the mixer to the thread. Domestic mixers do not have an aerator, so the domestic tap a gander is not possible to install an aerator. All modern mixers have the ability to clean and replace the aerator mixer.

The main task of the aerator

• Break up the stream of water so that it is not sprayed, hitting the bottom of the sink or washbasin.
• Saturate the water with oxygen.
• Filter large particles of debris in the water.

An important detail in the aerator mixer a strainer, it must be periodically cleaned of accumulated debris on it and limescale. Frequency of cleansing aerator depends on the water, the degree of its contamination and rigidity.

Removing and cleaning the aerator from mechanical waste activity is not difficult, but what to do with lime? To do this, use special tools to remove the scum ( "descaling"), or use the usual vinegar.

It should be noted that the aerators are two views: with external thread (M24 mm. ) And internal thread (M22 mm).

Cleaning and replacing the aerator

Step 1. Unscrew the aerator using an adjustable wrench.

Step 2. Remove the aerator from the spout of the mixer.

Step 3. Remove the filter holder from the aerator.

Step 4. Lower the filter overnight in a means for removal of scale or vinegar.

Which means you are removing limescale with aerator mixer? Please write in the comments.

Briefly and without frills. To subscribe to the channel, put huskies, share with your friends. Thanks!