Roman blinds: how to make?

The main advantage of Roman blinds is the ability to fit into any interior. Moreover, Roman blinds can be used in any room: kitchen, living room, bedroom, etc. The choice of these blinds is expanding opportunities to create a unique design.

Wanting to acquire roman blinds, you can go to a specialty store, but a good solution would be self-creating them. The main thing in this case - the correct selection of fabric, since it affects the quality of the end result and attractiveness received curtains. Accuracy and responsibility will help to create the desired solution.

materials

The first step in the realization of the idea is to acquire the desired tissue. The choice of colors must be done according to their own preferences and given the characteristics of the interior, where there will be curtains. In this case, you need to choose the cloth so that their colors had the most dense texture. The geometrical dimensions of the curtains of the future are determined after measuring the size of the window. In this case, you need to add 2 cm on each side to be able to bend and hem curtains. Perform measurement window parameters need with great precision, so as not to make mistakes during the creation of curtains.

Another important component of the Roman blinds are solid metal rods or wooden slats. The length of these elements should be slightly less than the width of the curtains. The number of rods used depends on how many folds the curtains you want to get, and is equal to this value.

During manufacture curtains need to purchase or make yourself metal or plastic ring having a diameter of 1.2-1.4 cm.

At the bottom of the curtains need to install a weighting bar, which will contribute to tension fabric. This strip can be made independently with wooden slats or metal rod.

It is also in the process of manufacturing the curtains need a strong cord. Its length is equal to twice the length of curtains and adding to them the curtains wide. Cornice for curtains can be purchased at the store or, if there is a desire to make it manually.

Getting Started

The first step in the manufacture of Roman blinds is a pattern. At the same time we must not forget about two centimeters that we left earlier in the form of stock for filing and cutting out. All manufacturing steps are carried out on a flat curtains solid surface.

Material required carefully smooth out and put his seamy side up is necessary. In this position, the folds required to create artificial tissue by nametaniya their stitches or by means of fixation with the use of conventional pins. After completing this step, proceed to filing the edges.

In cases where the mount manufactured products will be carried out on a piece of wood, rather than the standard eaves, should pay special attention to the upper edge of the curtains: it is necessary to sew sticky tape. If fixing the curtains will be made on a conventional curtain rod, it will be sufficient to limit the double seam, which will be held at the top and bottom of the curtains.

The top seam should be located six inches from the hem edge. This rule should be considered carefully. Then, between two adjacent joints installed a twig, which will give a curtain shape.

The next stage of work is the bottom hem curtains. This will require the hem of his two rows of small stitches. Note that the distance between these stitches should be such that it was possible to establish the weighting bar without any problems.

After all of the above items should sew the ring in those places where the curtain rods for sutured. The distance between the rings must be chosen based on the width of the curtain. To lift mechanism has worked well, it is necessary to sew rings to the upper rod.

After the above operation performed, it is necessary to hang the curtains on the ledge. Then you need to take three and thread the cord them along all the rings that are on the top. If you used the bar, the upper rings are fixed on it, and when it comes to working with a cornice, a ring worth to hang on the individual hooks.

The final stage is the threading of the cords through the rings. Thereafter cords must be tied in a knot to secure a firm connection. Now you can manually adjust the height of the curtains by means of cords.

Congratulations! Your product is ready to use! Now you can enjoy attractive appearance and practical Roman curtains. Good selection of fabrics will create harmony with all elements of the interior and emphasize your individual style. Roman blinds make it easy to vary the amount of light entering the window.