Frame bath 6x4 with their hands
Classical frame technology is used worldwide for the construction of safe buildings. Therefore, it will turn out a quality sauna.
Work begins with the creation of the foundation of the belt type. In the central part will be another foundation, since it would require the construction of a brick oven.
Then fit the bottom rail on the sleepers, pre-arranged on the foundation.
Thereafter, the construction of the walls.
The walls are assembled on the ground and mounted on the bottom plate.
The next step is stacking the upper trim. Thanks to her, the walls are fastened securely.
Installing jib gives rigidity.
Further, the partition is installed and then it is going to upper harness.
Then the furnace building stone.
And after it and the roof. The rafters created drinking was being done to stop the upper harness. This helps distribute the load on the structure correctly.
Rafters, the upper rail and ridge board fastened, and then mounted ceiling.
Roof overhang must be reinforced by a lathing. And in order to avoid gaps between the rafter mounted jumpers. After the completion of plating baths performed OSB panels. Require insulation and exterior decoration, and this is the next stage of construction.
A source https://www.allremont59.ru/stroeniya/banya-stroeniya/karkasnaya-banya-6h4-svoimi-rukami.html