We do folding fishing chair with his hands

Greetings to all of its guests and loyal readers. With you as always Mikhalych and another homemade that I found interesting. Who is going to do and compact folding fishing chair. As always I want to warn that the material presented here is not accurate instructions to the action, but just the idea that you can take as a basis.

I take this opportunity to thank our subscribers for your activity in the comments. You give sometimes very interesting ideas and motivate me to create interesting content for you.

I can not write beautiful entry, and you do not come here for this, so straight to the point.

Take the tube out of polypropylene of 25 mm in diameter and cut into 4 segments of 20-25 cm in length. No more meaning, because the legs will bend under your weight. So do we need 4 plugs to prevent dirt from getting into the inner cavity.

The note. If the height of the chair is 25 cm small for you, you can make the legs and longer, but in this case it is necessary to insert into the pipe metal fittings to prevent break under your weight.

Then heated each foot of building a hairdryer, and a soldering iron can be used, if you have one.

Then don on the heated portion of the plug.

Here tight seal is not important, so do not be bother to meet soldering technology. Dress caps on all 4 legs of our stool.

Now we need the elongated nut 10 and a bolt. Screw the nut on the bolt and warm up her hairdryer.

Heat the nut to be able to solder it in the back of the PVC pipe. The heated nut is pushed into the pipe.

Here there is an important caveat. Do not heat pipe and heat is a nut and a force is pushed into the pipe cold to hot. If heat pipe cold and to push the nut, the nut falls out and poorly kept.

We perform the same actions on each leg.

Next, prepare sidushku. You can use anything you want except the CPD. In this case, we take the right piece of plywood and doing the layout under the legs.

Then drill holes for the bolts.

Now we take four bolts 10 with a flat hat sweat and insert them into the holes.

I recommend to make advance square seats for the bolts to prevent them from turning.

The bolts can be additionally put on the adhesive, for reliability.

On the reverse side bolts fix the nut previously placing a washer. The nut is tightened thoroughly.

Next, the inside of the seat hold conventional transverse line, preferably in the center. Well, if it has shifted to the centimeter, the accuracy is not essential here.

Now we need the 4 mounting under the diameter of our tube, in which we will strengthen the legs of the chair in the stowed form.

Clips fasten the inner side of the seat as shown in the photo below. Main pick the length of the screw so that then they will not stabbed in the ass)) Although for fans of acupuncture massage is quite normal))

We dispose of our attachment in a row and each gripping a screw as shown in the photo.

Well that's about finished. Screw legs with bolts and testing invention.

Here is such a neat chair you get a result. Of course it's not the royal seat, but it's better than to sit on the cold ground.

For transportation, twist the legs and fix them, "according to its stowed position." At the same time, our smodelka ready.

The seat of course it is desirable to protect from moisture. Painted or lacquered. Optionally upholstered with foam. In general, further already fantasize as you want.

With this I say goodbye to you and forward comments about this invention. All peace and goodness!

You may still be wondering:

We do welding holder for placing your own hands

Which drive to use grinders for cutting wood?

Author of the idea: Musiy4uk