Manufacture of suburban shops made of wood and concrete with their hands

I think everyone on their suburban or suburban area wants to have a area where you can just sit comfortably and enjoy the view, or nature. Cottage garden furniture does not give the right feeling. It's still building. But the comfortable bench in the shade of the trees in the open air - it's a little different.

The most convenient bench - with a backrest tilt with anatomical bend in the form of repetition of bars circuit. Not the most complex design.

Needed for the manufacture of a set of power tools: jigsaw, elektrorubanok, a small Bulgarian with adjustable speed and grinding cup screwdriver. As well as a table (workbench). If you cut the workpiece itself - then still need a manual, but rather a stationary circular saw. But you can just buy the boards and bars the right size.

Such a bench with drawings, dimensions for individual processing.

But if the shop is standing on the ground, the lower parts of the wooden leg 2-3 season may rot. Need to install on concrete tiles or paving stones and wood processing lazuli. What would be more durable bench - the foundation can be made of concrete.

These are the benches can be obtained by having the form shown below:

It all depends on your imagination. The filler can be used in the form of granite or marble chips, crushed stone or fine crushed CBC. After casting, the surface will need to be sanded with a grinder stone grinding cup (turtle) and lacquered stone. Concrete can be zakolerovat in the desired shade.

shapes:

Plastic molds for concrete sidewalls shops and their cost.

And, you can apply the technology of "Washed concrete", which I described in the articles, and the channel that is used for its facilities and products. Look through the article down.

The following offer watch a video with detailed manufacturing process (casting) here such concrete legs:

The channel has a second video author with the manufacturing process (processing) boards for the final stage of manufacturing bench. I think that turned out quite interesting option. The combination of materials always looks more aesthetically pleasing.

Too beautiful version benches made of wood and concrete (only the bolts securing the boards are not recessed inside). The legs are cast in concrete with reinforcement (three rod). You can do this: cut along a plastic sewer pipe. We fix tape halves, closing one side of the cover. In the form you need to drill and insert a plastic tube the pin (hole for attaching the legs).

Insert fittings, concrete is poured. A few hours later carefully remove the plastic formwork. And starting this tool to cut concrete patterns, similar to the bark of a tree. Next paint in wood hues (mixed with the desired pigment facade paint).

Can such stone legs to the bench under the tree to make in another way:

1. Take here this foil insulation, wind they need something, we diameter. The same plastic sewer pipe, for example. 2. Wrapped with tape on the perimeter to ensure that the concrete would not break the soft formwork. 3. Is passed through the form of a plastic tube the pin mounting feet. Insert valve and fill concrete (mixed on the sand in the ratio 2: 1). At least one day shoot a soft formwork.

The board is attached to the anchor. To do this accurately in the concrete need to drill holes. For better fixation of the feet in position crosswise - have to do with a disk grinder stone small drink. The deepening insert toward each other and pull their legs. After the assembly is left to trim grinder legs in one plane and paint the concrete under the shade of a tree bark.

What would you decide it is necessary puzzled by this process of self-manufacture or buy something ready-made, here are a few price examples:

Even considering the purchase of molds for casting bench base price will lower than the finished copy. I think if you do not in a single copy, but also neighbors in the village - you can buy molds.

Keep this idea, can someone at suitable as additional income derived from the activities on the site, these descriptions manufacturing of vases and pots:

Earnings on the site. Manufacturing technology of concrete vases without forms

manufacture of concrete vases and flower pots technology to give improvised forms

***

Photos taken from public sources, with Yandex service. Pictures

Subscribe a channel, introducing it in the browser bookmarks (Ctrl + D). There is a lot of interesting information.