2 quick method of cleaning a nozzle for a foam gun. Which to choose

These methods are useful when you need to quickly bring to life the gun that refuses to work. And we are talking about clogged nozzle (nozzle) of the instrument, consider the rules of service at the time of the launch of it's late.

The first method

I consider it the most simple, affordable and safe. This will require to drive a thin nail in any "piece of wood" and bite forceps hat, the main condition to the stump quietly passed into the nozzle bore.

Then press the trigger and forth motions of clean clogged until the foam will go, even if it suddenly shoots, then there should not be on you because you are on the other side.

The second extreme way

This method learned from the comments of readers and decided to test it. The bottom line is that it is necessary to heat the burner nozzle of the gun, while under the influence of temperature frozen foam melts and frees passage by bringing the instrument into operation.

A method of working, but flammable, since the foam was checking combustible material and therefore it is necessary to comply with fire safety measures and personal protective equipment. In addition, it is necessary to have at least a burner and a place where it's all you can do.

So personally, I choose the first method because of its simplicity and safety, and what did you like?

Subscribe, Share with friends, like, put Like!