The simplest remover of isolation from wires of clothespins
The idea of manufacturing improvised stripper for insulation of the wiring I suggested, for that very grateful craftsmen. Because I really liked, I decided to share with you how this terribly simple mechanism.
What is needed for implementation of the "project"
Yes, almost nothing: a strong and stiff clothespin with a wide rim and old sharpener for pencil. Even a blunt approach, the main thing to find her, or summon and withdraw from a friend of the schoolboy. Of course I'm joking!
Now, I rented a screwdriver with a blade sharpener, I do not throw the screw and go seek awl. It will need to pierce a hole on the side of the size shurupchika which is removed from the sharpener.
You can take a screw and a larger size, but I'm afraid that it will break the clothespin.
The place where the puncture is desirable to be chosen so that the position of the blade in the end allowed cut the insulation without affecting the veins. Here you can experiment.
In my case, the blade is almost equal to the clothespin jaws. But it was possible to raise a little higher.
If you look closely, the bottom is visible crack in this experimental clothespin - tighten the screws too much. Later, I moved the blade on the other side and everything was wonderful.
Do not even think that do not use this tricky little thing is so easy and convenient. And by the time she was nimble - is enough to make two turns to isolation from Wire section 2.5kb. mm It was neatly cut and prepared for removal.
Now homemade stripper or insulation stripper part of the permanent collection of tools, which take with them, leaving the house, it is very glad.
Evaluate material andsign upCanal.
And it is interesting:
2 ways to recover the precipitated sockets and switches in place
3 a method for replacing a mosquito net pens. Simply nowhere!
Corridor before and after gluing "gold" wallpaper. Photo report