Budget garage with his hands for two weeks. Foundation slabs on floors
Dec 23, 2019
Fill a plate frame garage at the base of the b / u pustotok
Winter is an excellent time to plan next season and begin to implement without wasting too much time. And best asset - a real experience. To be "master" garage, the budget, as usual, humble, and the result would be desirable decent - you are welcome. In FORUMHOUSE to this case have a history of Vovka_s. It tells how to build a budget garage with his hands.
How to save on concrete
It all started with the fact that I decided to build a garage at the cottage, in order to constantly keep it in the cornfield where I go looking for mushrooms, fishing and so on. D. Since construction was unplanned, garage budget was minimal.
I thought about how I make inexpensive foundation for future garage.. The solution came by itself-a.. A neighbor offered to give me 4 slabs that have long lay it around. Solved! The foundation is solid.
I cleared the ground, leveled it on a level and use the Rocker laid slabs. Get the basics, sizes 4,16h6 m. Then, I dug in front of the garage still under the entry area, a length of 1.5 m and did fight dumping bricks and rubble. Put the formwork from the old board-dyuymovka, laid reinforcing mesh. To raise the mesh above the base, instead of using chopped stands of 50 mm of the soil pipe cutters.
Next was caused by the mixer and 3.5 m³betona were covered on this basis. A few hours after pouring the slab, I hid the film and during the week daily opened it and spilled water. Floor slabs were used as filler, as the difference of the front and rear of the garage was about 40 cm, and I wanted to save on concrete.
Budget turned 18 thousand rubles: materials, manipulator, concrete delivery.
Budget garage with his hands:
1. Budget garage with his hands for two weeks. Foundation slabs on floors
Feel worthy, click Like!
More stories in the first person - in the thematic section.
Subscribe to the channel and will learn a lot of different ways, "kroilova without popadalova". Make repost in social networks, post working idea friends. Join the community of craftsmen FORUMHOUSE!