Inexpensive and durable wire netting and PVC tape: the installation of a fence of welded wire mesh
Many are thinking about how to save on the fence. The cheapest option - netting and welded wire mesh. The latter option now enjoys great popularity.
The grid has a light weight, installation can be performed independently. Moreover, the wire netting is durable and resists all weather conditions. The cost of welded mesh from 120 rubles per sq.m.
Thus, the wire netting - it is durable, inexpensive and the best solution to give. The only drawback mesh for the fence - prosmatrivaemost. Over the net and see everything your neighbors are aware of all your deeds.
There is a solution to the problem: Use PVC tape on the grid.
The tape will not only hide your site from prying eyes, but also to update the look in minutes. Besides fences this method is used to close the balcony partition.
Mesh (Welded or netting) is different mesh sizes. Therefore, the sale is a tape of different sizes. Ribbon sold beige, green or brown. It is flexible and easy to work with it. The tape does not rot and does not rust.
Installation of the fence mesh
Clear the area mark. In the corners of drive pins and pull the rope. Mark the places where it is necessary to set the supporting pillars. Typically, the supporting pillars are mounted on a grid width section.
Dig a pit under the pillars. It is better to do a drill. The depth of the pits is a quarter length of the support post. Pour the grout into the holes and set the support in the solution. Align the post with the help of a spirit level.
After one day, you can install the grid. For the attachment using clips or clamps. Fix the tape at 3 points on the pole.
The next stage - PVC tape weaving in the fence. There are different ways in different directions.
Can buy Curbing tape and close wire netting with its help. But curb the tape must be flexible. It can be purchased in the Fix Price or Leroy Merlin. She is not afraid of cold and heat, and does not fade in the sun. Curbing tape is easily cut to size with scissors.
The tape may be stapled or soldered using conventional soldering iron.
Fence obtained solid, solid and beautiful.
Channel RemontDom - zen.yandex.ru/remonts thanks readers for subscriptions and requests Like. Thanks and all the best!