An easy way to fix forever

All eventually breaks down. For example, to make repairs in the bathroom, put a new toilet seat, as time passed and he began to swing. It seemed a little problem, but it brings a lot of inconvenience.

Even recently put the toilet can "walk". The cause may be not perfectly smooth bottom of the toilet bowl or flat tiles.

Not even floor - a common cause. Floorings can be wooden or concrete. On a wooden floor often become loose screws. The boards, which is attached to the toilet bowl screws, may cause cracks. the problem is solved by replacing the wooden base. You can simply unscrew the toilet and fix it (move) a little bit to the side. But this is now rare. Most often in the toilet concrete floor, which is laid tile.

If you tighten the screws more, the toilet will be all the same to stagger over time. Tightening the screws more can accidentally split casing toilet.

A simple way to fix the toilet, that it move not

Unscrew the screws. But you must not unscrew until the end.

Now we need to prepare the wooden wedges. Insert wedges (3-4 pc.), To lift the toilet seat.

Next, clean the place in the toilet. Silicone scraped, washed from dust and dirt and dried for this place.

On the tiles paste the masking tape, make it easier to later remove excess silicone adhesive or any other (except for the adhesive liquid nails).

Some use a homemade putty epoxy adhesive with the addition of fine silica sand. After application need to immediately wipe off the excess adhesive with acetone.

It is best to use a conventional transparent silicone. He does not yellow, no mildew appears. But we must immediately have time to scrub the excess silicone with a cloth soaked in solvent.

Apply silicone under the toilet seat. Remove the wedges. Remove excess adhesive with a cloth and remove the tape.

Hold the screws carefully. The seam turns smooth. Wait for the silicone dry (over night). The toilet will now not wobble!

channel RemontDom He wants comfort. Place Like, please. Subscribe to our channel.