Spark plug socket with the inclusion of: the reasons and how to fix

It so happens that begins to spark plug. Often there is trust and a flash of bright light. This is a sign that there is a fault in the electrical outlet. It can be seen that the ends of the fork burnt. To avoid further problems (damage in wiring, plugs and sockets), you need to take action.

From such a sparking wire may melt, become hot and burn. What is the cause and how to fix it?

- Carry out an audit of the wiring. Remove and insert the plug when the power is off the device. First, turn on the network plug your TV, then turn on the button. After watching the TV turn off the button and then turn it off from the mains.

- In order not to overload the outlet is recommended to install both socket strip. Several outlets are better than extenders and subsequently spark.

Mismatch of old forks. The difference between the standard plug and socket. Spark plug out - for loose contact. Solve the problem can replace the old Soviet elements wiring.

Poor quality. Do not buy cheap Chinese accessories. Often sparks appear in Chinese outlets. Connectors is too soft and they move apart over time. The plug is not firmly clamped, and there is a spark. To solve the problem you can manually by opening the lid and tighten the contacts. But after a while arcing still occurs, contacts will be weakened. Therefore easier to buy a new, high-quality outlet.

easing screw terminals - a common cause. Springs, clamps, screws loosened over time. This is especially true of sockets, which are powered by aluminum wires. All the connections you need to pull over time.

Load. Each outlet has its own parameters and labeling. Her body Set the rated current. For example, 16 amperes. Current load may not be greater than this value. If you buy a double rosette and her body will be specified 16 A, it does not mean that it is for each socket 16 A. Rated current is divided into 2 sockets.

Some connect portability 3-5 outputs. Each switch on and run at large appliances.

Of course the product will be sparks and melted. Overloaded power strip - a common cause sparks in the sockets. Devices that are heavily loaded network must have a separate outlet.

deterioration socket connectors. With frequent use of plug slack jaws. Weakened and hot contacts. The problem is solved in a timely snap-action clips.

sparking outlets - it is not the norm. Be sure to address the causes, not to endanger their property and our lives.

channel RemontDom thanks for your attention. Place Like - thank you!