Useful content

Review of the DEWALT D25133B SDS + rotary hammer

Today I would like to review one of the hammer drill models. The other day I bought a model punch DEWALT D25133B SDS +.

Three-mode rotary hammer DEWALT D25133B SDS +
Three-mode rotary hammer DEWALT D25133B SDS +

To begin with, I have quite a lot of experience with rotary hammers of a similar series, as well as repair and construction work in general. Therefore, I definitely have something to compare this model with.

About buying a puncher DEWALT D25133B SDS + I have no regrets. In my price category, I have hardly seen any analogues of this model! I would like to pay special attention build quality. It's just great, which is very important for people looking for long-term use of technology.

DEWALT D25133B SDS + three-mode rotary hammer and case
DEWALT D25133B SDS + three-mode rotary hammer and case

In my opinion, the hammer drill is very similar to the model Bosch 2-26 and other analogues. However, the position in question is essentially easier, more powerful, and, importantly, cheaper. Just like Bosch 2-26, DEWALT does not contain acid heating reducer. However, with the same degree of work

Bosch begins to burn his hands. DEWALT D25133B SDS + also allows you to continue working more 25 percent of the time.

In general, I would recommend using a hammer drill for scrap work. in construction. However, it is not advisable to use it for small and neat work. Rotary hammer power designed for non-standard large-scale and heavy work. To perform any action, the user will have to apply a little effort and pressure. But with all this, it is quite easy for them to manage. That is why it will not be difficult to work with a perforator from unstable surfaces in the form of stepladders.

Three-mode rotary hammer DEWALT D25133B SDS + (picture shows: reverse and mode switching)

A separate advantage for me is miniature model. It is not always convenient to carry a huge and heavy case with you. PuncherDEWALT D25133B SDS + made of quality plastic. Even the steel clips and the fastening hinge do not add weight to the hammer drill.

Note that the walls of the model are quite thin. Therefore, with strong pressure, they can bend.

The capacity deserves special attention. Perforator case hardly suitable for storing massive and long drills. The maximum that you can store in it is directly yourself perforator, replaceable head, and some of the most commonly used boers.

Three-mode rotary hammer DEWALT D25133B SDS + in a case

The model has separate feature - marking and the possibility of joint cases with each other. However, I believe this feature is made for show. There are not very many benefits from it.

As a result, I will say one thing, hammer drill DEWALT D25133B SDS + I recommend buying. It works great, and its cost is quite affordable. The quality of the material for this price is very good. therefore the equipment is definitely worth the money. The only thing I advise is to familiarize yourself with the operating modes of the device. If they do not suit you, then it is better to give preference to more powerful models, for example.

We also have a lot of useful and interesting information.for construction, finishing works, design, landscaping and much more! Therefore, do not forget to subscribe to the channel so as not to lose us!
Lathe of the router. Practical experience.

Lathe of the router. Practical experience.

There was a task to make a round table with turned wooden leg at the bottom. Lathe, and I do not ...

Read More

Blunder masters in the insulation of the loggia

Blunder masters in the insulation of the loggia

All masters know that adjacent to the living room wall of the loggia, you can not insulate. But t...

Read More

Our administration work. How I almost built a house in the cattle cemetery ...

Our administration work. How I almost built a house in the cattle cemetery ...

This article is not a complaintFor our government, and in particular on the management of urban a...

Read More

Instagram story viewer