Liquid rubber waterproofing where used, and how to make their own hands
Waterproofing home - one of the key moments in the construction. Liquid Rubber is a relatively new waterproofing material. Material durable, does not peel from the surfaces, elastic, and resilient. Liquid rubber with a technical aspect is not rubber. The reason for this name in the incredible elasticity.
The composition of bitumen emulsion with additives, polymers, stabilizers. The technical characteristics of the material similar to the roof 4 of the layers of roofing material with a total thickness of 2 mm.
Liquid rubber. Where to use?
- For waterproofing of the foundation, pipes, basements, walls, roof repair.
- To enhance the hydro and steam insulation of walls, floors, tanks, foundations.
- For the insulation of basins, drains, the protection of concrete constructions, water towers and so on.
- For the treatment of slits. Liquid rubber firmly tighten all the holes.
- The material is coated in the garage floor.
- used for waterproofing the floor in a house or apartment.
pros
- high level of adhesion to various materials: metal, concrete, wood and others.
- Seamless monolithic coating.
- Reliability The coating provides a 2 layer.
- Corrosion protection.
- Has no toxicity after drying.
- Even if the temperature drops waterproofing is not broken. Leaks are excluded.
Minuses
- The service life of up to 20 years.
- Not all of the material can withstand ultraviolet. Therefore further be processed spec. paint.
- Remove the material can only be removed mechanically.
One kilogram of liquid rubber costs about 150 rubles. There are several methods of applying a liquid rubber. Filler over budget. For spraying requires special equipment. For manual application using the painting rubber. It is applied to the surface with a brush, spatula.
Any kind of liquid rubber tightly adheres to any surface. It is only necessary that the surface is dry and free of dust.
Liquid rubber with his own hands
For minor repairs can prepare the material with their own hands. this requires PVA glue (2 small jars), packaging borax and water (half cup). It is possible to add a colorant (but not mandatory). Mix the water with borax. Separately, mix the dye and glue. All mix and use for repair.
channel RemontDom thanks for the Huskies and subscription. Quality repairs!