5 nuances to reduce the cost of the heating system in the house.

Affiliate material

What is important to consider when installing heating in a country house?

It is very important to build a good and high-quality house! But, it is equally important to create a comfortable space for life inside it. For us, this is, first of all, the presence of all communications: heat is always required (preferably with the possibility of individual settings), water and sewerage as in apartments... so that no problems and that's it worked!

It is necessary that everything functioned correctly, it is important to pay attention to the future heating system when choosing a house project! Here, first of all, it is required to determine the volume of the heated rooms, the location and type of the boiler, draw up a pipeline diagram with the place of installation of heating devices.

All this is important to do at the design stage in order to avoid unnecessary expenses in the future.

When designing, all the necessary hydraulic calculations are made first. This makes it possible to take into account all the necessary control valves for the heating system to be durable, to work correctly, quietly and efficiently.

By the way, here are the professionals in the field of installation of heating systems in Tver and Moscow http://aterm.ru/services/otoplenie/

The next task in design is the choice of the boiler capacity. Boiler power is calculated based on the volume of the house (its heated rooms). If the boiler capacity is not enough, then in cold weather the heat will not be enough, if the boiler capacity is too excessive, this will lead to unnecessary heating costs. Here the rule of the golden mean is true.

Also at this stage, the type of circulation is determined: natural or forced. If the volume of the house is small, then natural circulation is sufficient. If the length of the pipeline exceeds 20 meters, then forced circulation with the help of pumps is required.

An important factor in the correct operation of the heating system is the location of the radiators, as well as determining the number of their sections. Radiators are traditionally located under windows, with the center of the radiator under the center of the window. The distance from the window sill to the radiator should be about 8 cm, from the floor to the radiator at least 6 cm.

If lowered windows are planned in your share, then for the location of standard low radiators of 350 mm you will need 500 mm from floor level to window. If the location of the windows is lower, then the question will arise of installing radiators built into the floor, which will significantly affect the estimate of the heating system.

When calculating the number of sections in a radiator, the volume of a particular room is taken into account. If the premises are corner, or they have a balcony, then 2-3 additional sections are added.

The design also takes into account the way the system is controlled (manual, automatic or through the application).

If initially all the details of the heating project were thought out and taken into account, then during installation there should be no problems. After completing all the installation work, commissioning is carried out.

Perhaps, for ease of operation and the absence of unnecessary costs during installation, the most ideal option is for all work from design before the launch of the heating system was carried out by one organization, which will be responsible for the result their works.

We thank the company Aquatherm + http://aterm.ru/ for help in preparing the material.