Useful content

How to clean a filter in a washing machine. Takes 5 minutes

click fraud protection
Photo 1. Indesit machine.
Photo 1. Indesit machine.

The machine is still under warranty, 10 months after purchase, but did not pull until it was heavily clogged and cleaned it. I'll show you how to clean the filter in the washing machine and put everything back together. I will say that the Indesit filter is hidden under the decorative panel, which had to be removed. Filter cleaning took less than 5 minutes.

Photo 2. I remove the panel from below.
Photo 2. I remove the panel from below.

The decorative cover that covers the filter is plastic and flexible enough. You can pry it off with a screwdriver, but in order not to scratch the paint on the metal case above, I used a strip of PCB. You can try to do this with a ruler or something similar.

There are three latches on the top end of the lid: closer to the quarries and in the middle.
Photo 3. I drain the water.

After removing the lid from the bottom opposite the filter, I put a shallow plate (you can use a tray), but if the machine is not on stands, like mine, it is enough to put a well-absorbing rag. I remember the position of the filter knob and unscrew it counterclockwise, but not completely. First, I let the water flow, which has run down less than a glass, somewhere between 150-200 ml.

instagram viewer

Photo 4. The filter is almost clean.

It happens that the plastic filter turns sour and it is difficult to unscrew it even with two hands. Someone manages to use WD-40 at the same time, but I think it will not help much, although you can try, of course. As you can see, the filter I removed is completely clean, and you don't need to wash it, except to rinse it. But often from the filter you have to get pebbles, sand coins, screws, a ringlet, screws, nuts, beads and a bunch of rags.

After washing the filter, it is worth checking with your fingers whether there is any debris inside the hole where it stood, wipe the remaining dirt with a cloth and wipe the thread to avoid leakage.
Photo 5. Reinstall the cover.

After washing, I put the filter back and turn the handle to its original position. I insert the decorative cover from the bottom up: first I put in the lower antennae, then I snap the upper ones. That's all!

Evaluate the material andsubscribeper channel.

Hand antiseptic at home according to the WHO recommendation
I threw out the corrugation under the sink, put the pipe 50 mm. There is a tricky connection
"Thanks" to the neighbors: I had to re-solder the pipes of the walled riser
How to decorate a fence of corrugated?

How to decorate a fence of corrugated?

Originally intended corrugated board for finishing the production and storage facilities, car pa...

Read More

Correct boiler for private houses

Correct boiler for private houses

Strict compliance with the standard requirements and best practices in the calculation and constr...

Read More

As you can cheat in the construction of wells

As you can cheat in the construction of wells

Many people believe that dig a well - not such a difficult thing: to determine the place, I found...

Read More

Instagram story viewer