What do you know about decorative plaster "Bark beetle"?
The modern market offers a huge selection of finishing materials. Textured decorative coatings usually look more attractive than a smooth surface. In addition to aesthetic properties, practical qualities are also of great importance - a rough texture and a complex pattern of chiaroscuro conceal small defects. This type includes plaster "bark beetle". This type of plaster is perfect for both interior and exterior decoration of a building.
Coating advantages:
- Strength. The plaster can withstand mechanical stress and vibration. Has a long service life.
- Safety The material is absolutely natural and environmentally friendly. This allows you to use it inside living quarters, children's rooms.
- Ease of care. Dust, dirt can be easily cleaned with water or any detergent.
- Resistance to temperature extremes. The material easily tolerates temperatures from -55 to +60 degrees.
- Fire resistance. The material is not flammable, which makes it possible to use it in the kitchen, next to the fireplace.
- Easy to apply. Compliance with the correct technology allows you to make repairs indoors with your own hands.
- Original texture. The unusual pattern blends harmoniously with almost any type of interior design.
- Availability. The material has a relatively low cost.
The main components of "Bark beetle" are granules and powder. The grain size varies from 1 to 5 mm. As granules, marble or mineral grains of sand are used.
Differences in structure:
- with large grains;
- with an average grain size;
- with fine grain.
By type of main component:
- Mineral mixtures. Mixtures based on cement or gypsum have a service life of at least 7 years. Resistant to low temperatures and high humidity, they are used for finishing the exterior surfaces of houses.
- Polymer mixtures. The base is acrylic, which has high plasticity, thereby eliminating the risk of cracking. Under favorable conditions, the composition can retain its qualities for 20 years. Most often used for interior walls and ceilings.
- Silicone resin mixtures. They have plasticity, moisture resistance. The service life is up to 10-15 years.
Differences in readiness for use:
- ready-made solutions;
- dry mixes requiring dilution.
The compositions differ in purpose:
- for interior wall decoration;
- for exterior decoration of houses;
- universal formulations.
Bark beetle decorative plaster is applied exclusively to the walls. It does not hold well on the ceiling, and does not fit on the floor at all, since it has a high degree of porosity. The walls must be solid. Or they are pre-plastered or covered with a deep-penetrating primer, since the bark beetle will not hold on to bulk materials.
Well suited as surfaces:
- concrete,
- brick,
- cinder block,
- a rock.
We will be very grateful to you for subscribing to our channel or recommending to friends and acquaintances on social networks. And also, go to our sites, see the information you need, call, ask, consult, order:
Country master -https://dachamaster.org
DM-Cleaning -https://dm-cleaning.dachamaster.org