Useful content

Why not put the bathtub on the tiles? Our bathroom renovation (errors)

click fraud protection

When repairing, I want to do everything right. How to install, fix a bathroom on a tile? Can I put tiles on the floor under the bathtub? Sustainability of plumbing is the basis for renovation.

Photo: pobedimremont.com/wp-content/uploads/2018/12/9-1.jpg
Photo: pobedimremont.com/wp-content/uploads/2018/12/9-1.jpg

If the bath is made of cast iron, then a large load arises. Weight can reach up to 140 kg. It is chosen because of its strength and resistance to mechanical damage.

When we started the renovation, it took a long time to decide which bathtub to buy: acrylic, cast iron or metal.

We threw away the old cast-iron bathtub, on which the acrylic insert was glued (on polyurethane foam). We didn’t want to buy cast iron anymore, since it couldn’t be installed on the tiles. And the steel bath is thundering. It is necessary to additionally make noise insulation.

Photo by the author of the channel RepairDom

We chose acrylic. It is quite light (up to 30 kg.), There is a lot of choice of models, it is easy to care for and installation is faster.

Photo by the author of the channel RepairDom
instagram viewer

But she was on her feet. You can't fix it on the tiles (that's what those who made our repairs said). Such baths are unstable, they can slide on the tiles.

It is also not advisable to fasten the legs to the tile with anchors. Therefore, they did this: they removed the legs and put the bath on the bricks. Additionally, a frame was made of bars on 3 sides.

Photo by the author of the channel RepairDom
2 years have passed since the renovation, the bathtub does not stagger, it stands firmly.

For cast iron baths installation on tiles is contraindicated. The weight of the tub will erode the floor. The bath is about 100 kg, plus if you take water and take into account the weight of a person, then such a load will simply destroy the tiles.

Image: chudopol.ru/wp-content/uploads/2019/02/ukrepit-vannu-13.jpg

But there is output: Place metal plates 2-4 mm thick. Some put foam blocks under the legs so that they do not stagger and so as not to damage the tiles.

Glued pieces of plywood, textolite will do. What is not put under the legs: heel coins, glued pieces of OSB, which are fixed to the floor with a sealant.

Acrylic and steel tubs can be installed on tiles. But they are lightweight and can slide on smooth surfaces. Therefore, they are also attached to the walls and floor.

By the way, look our renovation with problems with neighbors and bugs.

Channel RepairDom: subscription. Please like it - thank you!
Laminate on the wall with glue: ways of arranging the slats

Laminate on the wall with glue: ways of arranging the slats

Finishing the laminate can be accomplished in several ways. We used to use a laminate floor. But ...

Read More

First row from the beam and free installation of a septic tank for the bath

First row from the beam and free installation of a septic tank for the bath

In the procurement of timber on the first crown (4 pcs.) I bought timber from larch. Because firs...

Read More

Kitchen knife, chandeliers, curtains for the kitchen from plastic bottles

Kitchen knife, chandeliers, curtains for the kitchen from plastic bottles

Of the usual plastic bottles can make useful items for the kitchen. Today we will show 3 cool ide...

Read More

Instagram story viewer