Thermo instead of the third glass: preparing for winter

Before the onset of cold weather, many people are thinking about the insulation of their homes. To get a comfortable temperature and save on heating, it is important to minimize heat loss. The insulating film is partially help to solve this problem.

What is the thermo

According to experts, about 60% of heat loss occurs through the window, and about 30% of heat is lost through the glass. Therefore, to protect the glass from the cold is recommended to use the imaging film.

Also, such a problem can be solved by installing triple glazing, but the version with thermofilm will cost much less. Such a film will perform the same function as the third glass.

Previously, one could often see plastic film on the windows of houses, which is nailed to the cold season. In appearance it was not aesthetically pleasing, the room is not to ventilate, the window will not see anything, but this is reduced heat loss through windows.

In thermofilm the same principle of protection, but it is more easy to use, is fastened on the inside, it does not prevent the airing and does not impair the view through the glass.

instagram viewer

The operating principle of fuser

Visually similar to a simple thermo polyethylene, but in fact it is polyester, which has a very fine spray of metal or ceramics. For deposition of this layer is applied flame discharge in argon. With this film may delay the warm air in the room in winter, and in the heat it will reduce the heating of the room.

Experts believe that the thermal insulation film may increase the temperature in the housing approximately at 3-5 ° C.

Price thermofilm can vary significantly, and the difference will be in its properties. The most expensive options will operate on the principle of a thermos, and to serve as a third glass, but does not protect against infrared radiation.

Dear film can not only reduce heat loss, but also protect from UV. it also protects the glass from mechanical impact - break the glass It will be much more difficult.

A method of fastening fuser

Dear thermo usually self-adhesive. To paste it, simply remove the protective layer and stick the web. It should be remembered about the air bubbles, from which it is necessary to immediately get rid of.

Do not self-adhesive thermal film can be stuck as follows:

1. degreased and washed out the window, and then give it to dry;

2. glue double sided tape on the perimeter of the frame;

3. cut the desired piece of film;

4. remove the protective layer adhesive tape;

5. glue shrink film;

6. for good and smooth stretch films need to work a hairdryer on its surface.

secrets

Experts recommend sticking thermal insulation film to the frame, not the glass. The free space between the glass and the film will create an additional barrier against the cold.

Replace film is recommended once a year, which reliably protects against unnecessary heat loss.