How to make the building level: 2 ways
The repair and construction often use the building level. It is used for laying tiles in the bathroom, the erection of the foundations to deliver the right washing machine and so on. D.
What if the level is urgently necessary, but it is not available? Today will tell how to make from scrap materials this useful tool.
For the application of precise layout of the horizon will gidrouroven. It consists of two vessels which are connected to the transparent tube. The tube may be 5 to 20 cm. Vascular (cones) mark must be applied.
pros gidrourovnya: Simplicity and ease of operation, it can make everyone. This is the cheapest rate for repairs and construction.
Minuses: It is important to make sure that no air bubbles (otherwise, all measurements will not be correct). Gidrouroven suitable only for horizontal surfaces.
Water level - do with their hands
- 2 of the syringe (without a needle and 20 ml) and the dropper. That's all it takes to create gidrourovnya.
- Connect a syringe to the transparent tube (drip). In advance to extract the piston from one syringe.
- Touch up slightly tea brewing water and pour into the hole up to the top of the syringe.
- Remove the plunger from the second. It should be that the syringe 2 filled half with water.
Attach a syringe to the wall and secure it with tape, if you are working alone. Attach and second water level mark.
The process to make the level for 1 minute
Pour into a plastic bottle of water to the brim, but that the remaining air bubble. Level ready!