Bath from SIP panels in 15 days

Thanks to modern technologies, alternative building materials are increasingly used in the construction of baths. They have a number of undeniable advantages over traditional ones. An example is SIP panels, which are gaining popularity every year.

Log house, timber, or self-supporting insulated wire?

Construction of baths from SIP panels in Russia began relatively recently. This building, practically vital for the Russian people, is usually associated with a wooden frame. But practice has shown that these steam rooms are in no way inferior to the log ones in their characteristics. And in many respects they even surpass them.

To begin with, the construction of a bathhouse from a bar or log is a long and very laborious process. For such a structure, a solid and deep foundation is required, which is considered not only labor-intensive, but also requires a decent financial investment.

In addition, it takes additional time for the tree to shrink. Some experts believe that a log bath should last for a whole year.

But the structure, which is being erected from SIP panels, will be able to please the owner with steam and the aroma of a birch broom in half a month after the start of work. By and large, this is the same wood, but without shrinkage properties. This material is not susceptible to mold and mildew, and insects do not start in it.

Features:

Pure SIP-panel constructions are seldom sold, mostly on a turnkey basis, as you should be ready for minor modifications:

• The structure will require internal cladding. When finishing, a board is used that imitates a bar or a traditional lining made of aspen or other non-resinous type of wood. This gives the decoration comfort, additional flavor, a sense of antiquity and the Russian spirit.
• A bathhouse made of SIP panels without modification can heat up quite strongly. There are few connoisseurs of such a harsh heat, therefore, high-quality thermal insulation of the steam room must be performed.
• For an attractive appearance from the outside, such buildings are finished with a block house, siding, metal profiles or any other materials of the client's choice.

pros

The thermal insulation characteristics of the Sip-panel bath are flawless.

• Moisture resistance. The material is processed at the factory with special environmentally friendly compounds.
• Turnkey construction in just a few days.
• Using a simple and inexpensive foundation.
• Construction is available at any time of the year.
• The space for building decoration is provided by a wide selection of materials for facade and interior decoration.
• Fire protection.
• Rapid heating, slow cooling of the room. You don't need a lot of firewood, and the heat stays on average 12 hours.

Domsovety channel: subscription.