Secrets of reliable home insulation with your own hands without calling professional masters from the company
Thanks to competently carried out thermal insulation, it is possible to achieve not only comfortable year-round living, but also a significant reduction in electricity costs. This is especially true in the context of a constant increase in housing prices. A high level of thermal protection can be achieved from the quality of the material, the correct quantity, the insulation scheme and the adherence to the installation technology. The thermal insulation procedure is simple only at first glance. Many difficulties can arise there. Therefore, it is necessary to tell about the secrets of reliable home insulation.
Warming rules
If expanded polystyrene was chosen to insulate a house from foam blocks, gas blocks or gas silicate blocks, the amount of material should be correctly and accurately calculated. This will help keep the budget and ensure 100% impact.
When calculating the thickness of the material, you need to pay attention to the type of building, the climate of the region. You should not take insulation that is too dense, but you should not take too thin either. The best option would be a thickness of 40-50 millimeters for Moscow and the region.
In order to achieve 100% insulation, it is also recommended to observe the following rules:
1. Take into account the characteristics of each part of the house;
2. Lay blocks of insulation in a checkerboard pattern, carefully sealing the cracks in the walls;
3. Put the insulation in two layers (10-20 millimeters per layer) so that the second layer overlaps the seams of the second layer;
4. At the corners, try to put a solid material for better sealing (start insulation from the corners).
note! It is necessary to make a competent vapor barrier with a hydro-windproof membrane. Choose only high quality material. Do not insulate the house in bad weather.
As a result, it is possible to achieve reliable insulation of the house without the help of outside companies. The main thing is to act strictly according to the instructions and not to leave gaps at the insulation plates.