Useful content

How to effectively and quickly clean old fat from gas stove handles.

click fraud protection


Each kitchen has a stove for cooking, and models with handles are very difficult to clean from grease and dirt. Even if you carefully monitor the cleanliness and regularly wash the stove, dirt accumulates in the most inaccessible places.


How to get rid of this problem easily and simply?


Conventional cleaning products are not always effective and are often completely useless.


The handles on the gas stove are made of plastic that can withstand high temperatures. This material is difficult to clean because the dirt is deeply embedded in it.


The most convenient option is when the handles on the stove are removable. In this case, the regulators are removed and soaked for a while.

It is much easier to remove soaked dirt with a stiff brush. Then the handles must be rinsed and dried.


But with the soaking solution, you need to be careful not to damage the plastic. In addition, in the cooled solution, the fallen off dirt is absorbed into the handles again.

Be careful not to over-expose the pens in the solution, so as not to repeat the procedure.

instagram viewer


Fixed handles are much more difficult. If you use cleaning powders, grains can get in and dirty the recesses. To clean them later, you can use toothpicks or cotton swabs.


You can of course buy chemicals to clean the stove and handles, but I recommend using proven folk recipes.


One of the most popular products used for cleaning surfaces is laundry soap.

To prepare such a product, you need to take 50 g of soap. Grate a piece on a coarse grater and dissolve it in 1 liter of boiling water. Sometimes I add a few drops of liquid scented soap to make everything smell nice.

Handles should be soaked in this solution for 20-30 minutes. Then clean the regulators with a brush, rinse under the tap and wipe dry.
Clean the non-removable adjusters with an old toothbrush and then wipe with a rag.


In addition to laundry soap, vinegar can be used, but it is only suitable for removable regulators. To prepare the solution, you will need 1 liter of water, to which you should add 5 tablespoons of vinegar.


Put the pens in the solution and boil them for no more than 10 minutes. After removing from heat, leave the adjusters to soak for a while.

After that, clean the handles with a brush, rinse with water and dry. Vinegar is not only an excellent cleaning agent, but it is also excellent at killing bacteria.


Ammonia is an excellent dirt remover. It is diluted with water in equal amounts, applied to the handles for 5 minutes, and then wiped with a damp cloth.


Everyone knows that citric acid effectively eats away even the most old dirt. Dissolve 2 tablespoons of acid in 200-300 g of water and wipe the handles.

I hope our article was useful to you, and as a token of gratitude please put your finger UP and do not forget to subscribe to the channel. Until next time!

Liming dolomite flour or lime?

Liming dolomite flour or lime?

Let's talk about what a culture can be in the ground to make lime, and under which it is impossi...

Read More

The best option for routing external wiring

The best option for routing external wiring

Sometimes we are not able to perform a hidden wiring option (eg you have a wooden structure), and...

Read More

Ondulin: a new roof over the old roof. Pros and cons of Ondulina

Ondulin: a new roof over the old roof. Pros and cons of Ondulina

When the roof repair does not work, it's time to change it. There is also an option - from the to...

Read More

Instagram story viewer