I bought a saw and began to train. To cut exactly at the mark

I bought this saw with adventures, because because of the sanctions it could not be delivered to Crimea, well, I have a friend in Moscow, bought it there and sent it by mail. On the saw itself at the end I will write to anyone interested.

Training number 1

The saw, of course, is not a jigsaw and keeps a straight line well, but I needed accuracy. It is not designed to work with the bus, what nonsense - fix it.

I attached plywood to the aluminum profile, rested the sole against the profile and sawed off the plywood, it looked like a tire, the edge of the plywood exactly coincided with the cut point. I made two such devices, a long one and a shorter one, made an ottoman with their help, cut off the door, what was needed.

Training number 2

The minus of the first homemade products is that they need to be set according to the marks, but if you need to quickly get a right angle? I decided to make a template.

He made an emphasis from a sheet of old furniture, set the desired angle, and attached the plywood again, so that he knew where the disc would go, conveniently.

Training number 3

I was glad that you can cut quickly at a right angle, but the device is heavy and awkward. What to do? And a new idea!

I attached an adjustable stop on a short bus, which can be set at the desired angle, since the fixation was inaccurate, I made marks of the exact position.

About the saw itself

The parameters in the photo, you can look in more detail in the store.

From yourself, aluminum sole without ribs, thickness 4 mm. 24-tooth disc, alloy HW, suitable for hardwood, softwood, chipboard and laminated boards. Saws like clockwork I have no regrets to fork out for this saw.