Sewage to give: the easiest option

Septic own hands

Without a doubt, the sinkhole - the easiest option for collecting sewage, but not the most successful. Having considered all the possible ways you can find your own. For example, you can pay attention to local facilities. If you have a standard skills, you can build your own septic tank.

To start, you need to design the building, and it is the ideal place to pick up. The volume of the septic tank is not difficult to calculate. Number of people living in the house all the time, multiply by 200 liters. The result of increase by another 20%. That figure, which you get in the end, is the volume of the septic tank.

If the shape of the construction - the cube, multiply the length, width and height to determine the volume. For a cylindrical shape must be multiplied by the height to the base area.

When you choose a location for a septic tank, you need to consider several factors:

· Set construction for at least 10 meters from a dwelling house and outbuildings on the site.

· From the source of drinking water it should be located 30-50 meters, no less.

· Fruit trees should be distanced by 3-5 meters. The road of 5 meters or more.

If ground water is too high, the septic tank must be completely sealed. If you yourself are building equipment that is ideal for sealing plastic container.

As constructed cesspool of concrete rings

Cesspool - a fairly simple solution for gathering and processing of municipal waste and sewage drains. Most often, such a structure is used for small cottages or houses with a seasonal residence, but it is hardly ever used for houses and estates, in which all currently living humans.

Cesspools are sealed cumulative or with a filter instead of the bottom. Significant differences are considered arrangement of the tank bottom and the frequency of getting rid of waste. In the first case, the entire volume of the waste is stored, which means that it needs to be cleaned often, up to two times a week. In the second case, the wastewater needs to be purified relatively less, because there is the capacity to fill an order of magnitude slower. Some of the liquid passes through the filter, which is installed instead of the bottom, and after purification seeps into the ground.

The first ring, in which the right has a bottom, mounted directly on the screed, made of concrete. Everything has to be set very precisely, it can guarantee the correct location of the assembly. On the ring placed immediately following, and the seams are sealed with sealant. To ensure waterproofing, it is necessary to apply different solutions.

20-30cm below the level of soil freezing is a hole for the sewage line. Now it is necessary to lay the pipe and hold it to the tank. If necessary, the need to insulate the tube further, as an upper part of the tank.

Note - useful advice when building a house!

In the design process, consider the desires of their capabilities. Notions of luxury living in the "palace" often end in disappointment. The resulting budget gaps lead to unfinished construction, excessive experiences, and eventually - it is impossible to realize the dream. Is not it better to build a house in a fairly reasonable, but guaranteed amounts secured?

p.s.: We try to give you the most important, useful information. If you have been interesting and helpful place "like".

Subscribe to the channel, the only way you will be informed of new publications - in front of a lot of new and interesting information!