How to make the system automatic irrigation

Vacationers who dream to buy seedlings pears and arrange on your backyard beautiful garden or lawn, sooner or later reflect on his watering. Of course, the garden can be watered with a hose by hand. However, it takes quite a long time, if this is not enough time, the output will consist in setting up an automatic watering system. If you decide to do an automated system, its installation should be implemented prior to the breakdown of the lawn or garden, or lawn and garden ready to have to dig in different locations.

First, determine the installation site with water spray. The optimum placement of such a scheme in which a few will be installed in the center, and the other at the corners of the lawn or garden. Normally, each dispenser capable watered about 4 m ?.

After a defined place for dispensers should dig trenches for pipes. The trench is laid hose end while it is displayed on the surface and lies in the composition pipe. Previously, in the tube should perform several holes so that the water jets are left up.

The upper part of the tube is tightly closed, the pipe itself is attached to the main hose. The same sequence is performed assembling the remaining nozzles. Upon completion of installation work, check the system is operating.