Useful content

How to reliably protect windows during renovation: life hack from the finisher

click fraud protection

Cleaning windows after renovation is difficult and in some cases frustrating. Why is that? Imagine: you installed windows for 250 thousand, and after the repair there were scratches on them and the paint was not washed everywhere. To prevent this from happening, there is one good way, which Sergei, a member of our portal, will tell you about.

How to reliably protect windows during renovation: life hack from the finisher

Useful advice should be reasonable

Life hacks are different and most of them are designed to save money or material. People offer free or very cheap solutions to certain problems. I am also for saving, but for reasonable.

For example, we painted the facade of a brick house, or rather, we reworked it after others. The windows were already closed from the outside with a film that was attached to ordinary scotch tape. The work was done, the film was removed, but traces of the scotch tape remained. So when the customer laundered them, there were scratches on the frame. Not critical, but also very unpleasant.

It's not free

About three years ago I learned about liquid film. This is a kind of composition: in consistency and appearance it resembles PVA glue. It is applied with a roller or a brush on smooth and non-absorbent surfaces - glass, plastic frames. After application, this composition hardens and turns into a film, which is, as it were, glued to the surface.

instagram viewer

The thing is very useful. It is like a preservative protective layer on windows. It protects against scratches, sparks, moisture, dust, paint, cement and plaster mortars. After use, it is removed from the surface.

The cost of such a product varies from manufacturer to manufacturer, but on average 1,300 rubles per liter. This liter, according to manufacturers, should be enough for 6-8 square meters of surface. But this is, of course, a bold statement. In fact, 4-5 meters. But the protection is worth it - there are no problems with customers due to dirty windows and damaged frames.

How to work with liquid film

It is easy to work with this composition: before applying, you need to wipe the surface from dust; then stir the composition well and apply with a roller or brush. But there is one caveat - it is necessary to apply a liquid film with a thick, thick layer. If done thinly and economically, it will only get worse - peeling off the film will turn into a problem.

I repeat once again - this is not cheap. But on the other hand, this is the best way to protect windows during renovation. I always offer this option to customers, and in 70% of cases they agree. The math is simple: a new window, for example, costs 15 thousand rubles, and its reliable protection with a film will cost 300-400 rubles. Is it so expensive?

How do you close the windows during the renovation? Write in the comments!

Read also:

  • Windows of the Future - What Will They Become? About window trends that will change our homes.
  • Blowing from the windows? We will tell you how to fix the problem in 15 minutes by adjusting the locking mechanism.

Watch the video - Barnhouse for a large family with soundproofing: mark the children's fort on the second floor.

Winter construction: a trowel, metal frame, the budget of 200 thousand rubles

Winter construction: a trowel, metal frame, the budget of 200 thousand rubles

The story is about how to build an inexpensive winter workshop if: the weather is against it, and...

Read More

Potatoes are no longer rot in storage. Dangle grass

Potatoes are no longer rot in storage. Dangle grass

photo illustration taken from open sourcesDo not rot, do not germinate and did not turn black eve...

Read More

Why cut grass works better than green manure and manure

Why cut grass works better than green manure and manure

Someone gets manure in the fall, someone plants a green manure on the beds, I use a simple cut gr...

Read More

Instagram story viewer