Useful content

Repair without problems: do-it-yourself textured painting "like sand"

click fraud protection

Construction technologies have made great strides forward and the usual and already boring wallpaper can be replaced with a beautiful textured coating. And for this you do not need to be a specialist finisher at all - modern materials will allow even a beginner to easily cope with this task! How to make a decorative painting "under the sand" - read on.

Repair without problems: do-it-yourself textured painting "like sand"

What premises is this coating suitable for?

The sand effect paint is suitable for any indoor heated area. This coating is not afraid of moisture and can be used in the kitchen and in the bathroom. A variety of textures and patterns can be applied to the coating.

Over time, wall decoration with textured paint "like sand" does not lose its presentable appearance and almost does not accumulate dirt. It is easy to care for it - it is enough to regularly wet the coating.

What is needed for this

Necessary materials:

  • primer Betonokontakt;
  • tinted primer paint;
  • decorative paint with sand effect.

Tools:

  • painting fur or thread roller;
  • flat paint brush;
  • tray for paint.
instagram viewer
The publication uses photos from open sources

How to create a textured finish

The wall should be prepared in the same way as for wallpapering. First, the base must be primed with Concrete Contact. This can be done either with a brush or with a roller. The number of layers depends on the absorbency of the material. If there are dry spots, you need to apply another layer of primer.

Priming is a mandatory procedure. The primer cleans the surface from dust, strengthens the base, improves the adhesion of the coated surface.

When the primer is dry, apply a preliminary coat of tinted primer with a roller. It is usually sold complete with textured paint. The color of this paint must match 100% of the textured finish. After application, wait until the pre-coat is completely dry.

Next, you need to apply a finishing layer - textured paint with sand. This should be done with a roller, and after that, immediately form a coating pattern with a brush.

The publication uses photos from open sources

It is best to carry out this operation in stages - 1 m2 each: apply textured paint to this area with a roller and give the necessary pattern with a brush. Drawing means to disperse the sand in a certain way: waves, herringbone, circles, strokes, or in any other way.

Before carrying out work, be sure to read the instructions for the primer and paint! Some formulations require dilution with water.

How do you feel about textured paint? Write in the comments!

Friends, there are already more than 80 thousand of us! Like, subscribe to the channel, share the publication - we are workingso that you receive useful and relevant information!

Read also:

  • Always put the fence facing your neighbor! Let me explain why.
  • When to salt and how much to marinate the meat so that the kebab is juicy: chef's tricks.

Watch the video - The nuances of a duplex: the pros and cons of living in a two-family house.

Why do I plant spring garlic in early spring, as soon as the ground thaws: I share my experience

Why do I plant spring garlic in early spring, as soon as the ground thaws: I share my experience

Spring garlic is propagated by cloves. Landing in open ground can be done as soon as the ground t...

Read More

What should sprinkle pepper

What should sprinkle pepper

And the amateurs and professionals often lament that is not growing peppers. Only they did not tr...

Read More

How to make asters brush up in 3 days. I share my experience

How to make asters brush up in 3 days. I share my experience

To grow aster seedlings at home, you need to follow these steps. Thanks to this method, your aste...

Read More

Instagram story viewer