Glued the breakage with baking soda super glue. I explain the secret of the gluing speed and strength of this adhesive mixture
For over 30 years, everyone has known super glue. It was invented in the USA and has been sold there since the 50s of the last century. The working substance in this glue is called cyanoacrylate. This substance polymerizes in air or upon contact with the moisture contained on the surface of objects.
Scientifically, this process of polymerization of cyanoacrylates is called anionic polymerization when exposed to weakly alkaline agents and ordinary water. In this regard, many people know the folk way of adding baking soda when gluing with super glue.
Baking soda is an alkaline material. And when added to cyanoacrylate, it will be not only a filler, but also a polymerization accelerator. Moreover, very fast. The material of such an adhesive mixture has high strength characteristics and can replace epoxy compounds by itself.
If the super glue slowly dissolves when water gets into the seam and the product falls apart over time, then cyanoacrylate plus baking soda are already insoluble. But the material, like cyanoacrylate itself, is a poisonous compound and contact with food materials is prohibited.
Instead of baking soda, you can use fine plaster, concrete dust - they are also alkaline. And both fillers of the mixture will act and accelerate the polymerization of superglue. Baking soda is more affordable - found in every kitchen. And its white color is perfect for many materials.
I have accumulated a number of broken things. As before, using super glue and soda, I glued them together. Used super-glue TM Contact. Some assortment of the brand is shown here:
I show the process and result of gluing super-glue + soda.
In winter, the door handle on the side of the balcony was broken. There is no desire to search for her. I decided to glue it together. Moreover, I know that it will not break at the gluing point. Tested on other things.
The third time I glue the ring that holds the curtain in the bathroom. As you can see, the third time it breaks in a new place, but not in the same places where it was glued with super glue with soda.
The plastic shelf in the refrigerator is broken. Apparently, the plastic has become quite fragile. Previously, he glued and soldered the seam with a soldering iron. But it didn't help for long. Then I did not know the secret of gluing with soda yet. There is moisture in the refrigerator and in a few years the super-glue has dissolved and the breakdown has repeated. This time I glued it with soda super glue.
Children's creativity. Super glue + soda perfectly adheres metal to plastic.
After this exercise, the fingers were in super-glue. I used to go with this crust. During the day, moisture fell off when washing hands. But now I have a super glue cleaner:
It removes super glue + baking soda not so well. But pure super-glue dissolves and wipes off with a bang. At the same time, I cleaned the dirt from the foam on the silicone phone case (there were traces after photographing the foaming process - I did not see that the glove was in foam).
I hope those who did not know about such a simple way to strengthen the strength of super-glue and speed up its setting - the article will be useful.
***
Subscribe to the channel, add it to your browser bookmarks (Ctrl + D). There is a lot of interesting information ahead.