Premium PVC plastic windows in Uzbekistan

Modernwindow systems - versatile and very reliable glazing structures with a high level of thermal insulation, an ergonomic mechanism for opening and adjusting the position of the sash. The presence of high-quality windows helps to solve the problem of heat conservation and, as a result, significantly reduce the cost of heating and air conditioning.

Realizing well that, plastic windows in Uzbekistan must correspond to the specifics of the local climate, AKFA company has created a whole line of new generation products that are in demand not only in the domestic but also in the foreign market. The company's products are exported to 20 countries, including Holland, Germany, Canada and the USA.

Features of AKFA PVC windows

In high-quality windows, the thermal conductivity of the glass is compensated for by an inert gas, which creates a gas layer between adjacent canvases, which reduces heat loss at times. The PVC profile does not let the cold pass, as it is structurally divided into several sections, which meets the requirements of SanPiN, according to which there should be at least three chambers. Chambers between glass panes of PVC windows protect from cold and noise. Even two-chamber

glass unit AKFA reduces the level of city noise already by 40 dB, which ensures almost complete silence in the room.

For particularly noisy places, the company offers double-glazed windows with reinforced noise insulation, the chambers in which differ in depth, which allows you to effectively dampen sound waves. For example, 6-chamber Engelberg 8000 profile additionally equipped with several layers of insulation. BUT premium profileEngelberg 7600 adapted to hot climates, withstands large temperature changes and mechanical stress. Windows created using this technology can last up to 80 years.

It is important that for the conditions of Central Asia, additional protection of premises from ultraviolet rays is realized by means of a special film that is glued to the outside of the windows.

AKFA aluminum windows

For the manufacture of window and door blocks, the company AKFA often uses aluminum as it is almost three times lighter than steel and is ideal for small and large glazing systems. The material is easy to process and under changes in environmental conditions it experiences only minimal expansion-contraction, therefore, critical stresses do not arise in the system.

Produced by the company aluminum window systems in Uzbekistan do not require additional reinforcement with beams, even with a small profile width, since the chamber structure of the profile ensures high structural rigidity.

The manufacturer's arsenal includes a whole range of aluminum profile systems for various purposes:

• Standart TERMO 67 - Three-chamber window-door system with thermal inserts made of reinforced polyamide. It is not sensitive to weather factors and is recommended for private, commercial and industrial premises with increased requirements for thermal insulation.
• Standart TERMO 70 - 5-chamber system with increased thermal insulation requirements and different design options. Designed for outdoor architecture of buildings.
• Standart TERMO 65 - a system based on a 3-chamber lightweight profile with two thermal inserts with increased heat and sound insulation. Such windows are perfectly protected from the hot sun and are suitable for both new buildings and old buildings.

AKFA has one of the largest automated production facilities in Central Asia and knows subtleties of how to make universal, trouble-free and beautiful PVC windows in Tashkent, more about which here.