Extractor for unscrewing broken bolts, screws, screws. I will show you how to remove a bolt in 1 minute
A sharp blow, improper key operation, or other actions may result in a broken fastener head. How do you get the broken bolt out of the part now?
Often such problems occur when repairing a car. It is necessary to remove the broken screws, screws, pins, bolts. If the breakage of the fasteners is insignificant, then you can try to remove it with pliers. In other cases, a special tool is needed - an extractor.
Extractors on sale can be found in a set or per piece. I bought it in the kit. There are 5 extractors for bolts, studs.
On the back of the box are numbers that indicate the number, the diameter of the bolt for the extractor.
Extractors are of 3 types: rod, wedge and helical spiral. The tool shank can be four or hex. To unscrew, you need another knob or screwdriver.
There was no wrench in my kit, so I tried to work with a screwdriver, and then with pliers. Removing the chip is quick and easy.
I will describe step by step the principle of operation
One extractor broke due to inexperience. Then he got used to it and everything went well.
Saw off the hat.
With a core, we make a small indentation in the center of the bolt.
Next, use a punch to drill a hole.
Now you need an extractor of a certain diameter for the hole. Insert the threaded end into the recess. Then carefully drive in the extractor with a hammer.
We unscrew the extractor together with the damaged bolt. I did it with pliers, but it is convenient to do it with an additional tool - a wrench.
For a professional such extractors they are unlikely to be liked, but they will be quite useful for a home craftsman. Moreover, the price is not high.
Thank you for watching, successful renovation and all the best!