A trick from summer residents: how to clean the bottom and walls of the pool from sediment with a snow shovel without a vacuum cleaner

Your own pool in the country is the best rest. What could be better? But the rest can be ruined if you do not take care of the cleanliness of the pool in advance. often the walls and bottom are dirty, algae appear, the water becomes cloudy green with an unpleasant odor.

To avoid this, you need to purify the water using chemistry or other methods. We are about this wrote in this article. The most popular methods are with brilliant green, peroxide, whiteness or copper sulfate. I like cleaning with peroxide better.

But after purifying the water, sediment remains at the bottom and on the walls. How to remove it?

There are many cleaning supplies available on the market. There is ozone water purifier. This special apparatus facilitates filtration, removes impurities, prevents algae and removes heavy metals. The pool can be cleaned without chlorine and other chemicals. Another plus - there is no irritation on the skin and mucous membranes. Minus: a complex device, you need to know how to set it up, and it costs from $ 30 thousand. rub.

There are various filterthat purify the water, but they do not fully guarantee the cleaning of the tank. Therefore use vacuum cleaners (vacuum, manual or automatic). The price ranges from 1200 - 300,000 rubles. Manual ones are cheaper, robotic vacuum cleaners are the most expensive.

A trick from summer residents

To clean the bottom and walls of the pool from debris, sediment, no pumps, filters or vacuum cleaners are needed. The mechanical method is not the fastest, but it is free and of high quality.

So, we take a brush and, without draining the water from the tank, three bottom and walls from solid chlorine deposits.

Next, you need to take a wide snow shovel or other object (for example, a clean baking sheet) in the barn. We lower the shovel into the pool and adjust the water in a circle, creating a "funnel". The water will swirl and all the sediment will be in the center.

When the water stops moving, we start cleaning without using expensive devices. We don't need a vacuum cleaner. Although it is necessary to make one not tricky device.

You will need a rubber hose and an unnecessary plastic canister. Cut off the top of the canister. At the bottom you need to make a round hole for the hose. It turns out something like the following:

When the canister is lowered into water (not completely), the fluid is sucked in by the hose. All sediment from the bottom is easily sucked into the canister. And you don't need to buy any vacuum cleaner!