I beg at the table! Successful furniture designs.

Self production of furniture, people usually come from, when you want to do something, then do not buy in the shops, and the golden hands are drawn to joinery tools, And spend money on something that is quite possible to do it yourself somehow... not on Feng Shui. And very often the result exceeds expectations, if not, then certainly - assortment of furniture stores. In this you can see by the example of projects implemented by our portal users.

Beautiful desk

Sometimes the participant FORUMHOUSE shows "made in his spare time" thing that becomes the subject of controversy. So it was with a desk, who performed TTJ, because "the building, budget bursting, furniture have to do everything myself."

As we can see, it is perfectly made table, witty work, which shows the high level of skill and artistic taste of the abyss of his author. And so he definitely more interesting and more beautiful than standard products under the name "computer table" in furniture stores.

All the elements are made of plywood "20", table legs - an L-shaped frame, the surface is tightened veneer fine-line. For the same master technology mechanic 4 digits, making the bookshelf to set the table and explained every step. The table was made in the same way.

Thus, the basis for the product was made according to the technology tamburat, Except that instead of chipboard particle board "10" had to dial a thickness of 50 mm. For bonding of plywood sheets used PVA D4 clamps.

Delfinca (User FORUMHOUSE):

Interesting idea. I love the furniture of thick items. She always looks expensive and steeper.

Then, pre-manufactured pattern cutting was performed, and then - cutting out parts.

All details are the same, do the calibration.

Then the calibrated preform veneer glued together with the sides.

After removal of the glue residue on the shelf are glued to the ends of the veneer.

Thus, the shelf - inverted table in miniature.

It remains to putty joints, remove excess putty, paste veneer, otshpaklevat and varnish.

In working on a set of use contact adhesive for wood. An important point - if you try to buy it in a store, you are likely to offer "Moment" or glue for cork. If lacquered these adhesives are reactivated, and lead inevitably fall off. It would therefore be correct to produce the adhesive in a firm specializing in professional materials for wood.

Here is the complete package mounted on a permanent place.

Table for forged legs with glass top

Another project TTJ - beautiful, even refined table, unlike the previous one, was not made from the beginning to the end in his studio.

The legs of the table were ordered to forge firm profile bought at the hardware store. countertop TTJ "Skidan quickly" and pasted veneer (walnut). Black with a patina of the table legs can not rhymed with veneer and profile, so were repainted in dark brown patina color. Paint foreman got mixed in the right proportions it brown and black.

The next stage of work - perepatinirovanie table legs. In this process, only the name of the complex - simply take almost dry brush and rubbing the convex portions of the product.

Then I was glued profile, and all the details, including commissioned by the glass, were collected into one, certainly an impressive table. It is clear that such a piece of furniture sets the tone in the room. But I think that for TTJ with his golden hands is quite a simple task.

TTJ (fourth discharge technician, FORUMHOUSE user):

Around this table have to change everything - doors, battery.

Coffee tableco glass top

Often a certain fascination with the technology determines which pieces of furniture in the house will FORUMHOUSE participant. Some like to work with wood, someone - with metal. max68.2011 I carried away by gluing glass and made this one coffee table.

Carefully studied the information about gluing glass and realized that although it is not very easy, but it is quite feasible in the home.

max68.2011 (FORUMHOUSE User):

You can do things that will never buy in the store, and not so much because of the price, but simply because they did not do. Left master colored chemical toning with pictures! This is awesome!

The result of this interest was the coffee table.

The most part of the project expenditure of glass about 10 mm thick, its grinding, rounded corners and hardening.

Shelves are made very plain - from chipboard 16 mm, cut legs in chromed pipes F50 mm. Table put a four-wheel, two of which with brake.

The most interesting thing in this project - carried out by Max work with spetskleem, cured with UV light. In this case the source of UV light was a conventional 20W lamp LDR, wherein the standard bulb was replaced by a UV lamp. For connecting pipes and table-legs metal pyataks used that, in fact, cemented to the glass surface.

How about a table, it is clear from the photos.

max68.2011 (User FORUMHOUSE):

Glass is marked with marker rolls, mounted a few inches from the surface (that has passed the lamp). Place opposite the processed markup cleaner, dry. The adhesive is applied directly to two places pyataks applied thereto with a small load, from below the UV lamp is ignited. Her long enough at once for two terms. Then stick the next two penny.

An interesting detail: after the glue has hardened, Max screwed into the M10 stud heel "desired length", which put on a piece of pipe to ten centimeters long. Well, then it is clear: after cutting the pipe was installed plastic spacer, chipboard shelf, scrap pipe again, but in 40 centimeters, again "sandwiched" plastic spacer, another regiment of chipboard, and already below the wheel, fixed self-locking nut.

For some reason, many of the users of our portal "in the couch" lying around at least one large piece of Plexiglas. you can reduce the cost of the project if desired max68.2011., Using it for countertops plexiglass of a sofa. Such a material is a lot of minuses - plexiglass afraid of chemistry, becomes cloudy over time, it is extremely unstable to mechanical damage. But for the table under the TV that will be affected except that wipes the dust, it is quite good.

Coffee table-sculpture

That's the idea - a coffee-table sculpture - like many users FORUMHOUSE not only for its originality and style, but also functionality. How much junk, from magazines to zaryadok of gadgets and gadgets themselves, from books to stationery details, you can conveniently place it! It makes you want to translate this idea into furniture plywood or board, but the finished drawings for these products does not seem to exist.

God crafts (User FORUMHOUSE):

If the project drawing will have to develop yourself.

On FORUMHOUSE collected materials that will help in this difficult case. Before you take on the plywood or wood panels, God crafts I recommend to try to make the layout of the board.

Coffee table-chest

This popular idea implemented from design magazines illesoAnd he was a very decent job. Form, color and table finishes were selected based on the interior of the room where it will stand. Product dimensions given cover - 70 * 45 * 55.

All parts table (walls, bottom, cap, stem) of furniture panels made of 28 mm thick. Details were fastened to adhesive "in the end" and self-tapping screws, which were decorated by a wooden area.

That's fastened part.

This is a general diagram of the product.

In this photo you can see the bottom part of the product in detail. Praised the users of the portal this design.

Timur28 (User FORUMHOUSE):

The work is very worthy. Like.

They offered illeso to develop the idea and make a table, it - Pirate Treasure Chest for children.

Cabinet-table

onidenis I made the table-case to testify, but the idea FORUMHOUSE recognized as wonderful and capable of brilliantly be implemented in any room where there is a shortage of space.

So, the usual case, which we see in the photo below:

easily transformed into a table, because the bottom flaps his swing, and the top folds and becomes a tabletop, which rests on two legs.

This opens a niche, in which there are shelves for tea packs, coffee cans, biscuit boxes and other "any useful thing." The depth of the cabinet of shelves depending on the width of the boards.

To design looked easier and more attractive to its disclosed embodiment, onidenis I made glass shelves in the closet.

fanat35 (FORUMHOUSE User):

A very attractive idea. Seriously thinking about something like that.

Is it advantageous to make furniture the hands? Join the debate on our portal. We offer you to get acquainted with interesting options dining tables for the garden. Watch a video that explains, how to choose colors in the interior.

Discuss the article and read other materials devoted to country life you can on the websiteFORUMHOUSE.

Subscribe to the channel so as not to miss the next release!