How exactly to cut the bolt or stud without a grinder and it does not damage the threads.

When carrying out repair and construction works sometimes there is a need shorten the bolt or stud.

Most often these goals used Bulgarian. It can be used cut the bolt quickly and easily.

But what to do, if it did not have on hand, and you need to cut a bolt?

The answer to this question, we consider below.

Begin the process of shortening the bolt must with road marking.

For this using a felt-tip pen denote threaded seat next cut.

Then to bolt cheat two nuts beforestriping.

Nut next to the place of cut will play the role of limiterAnd Follow-up - her lock.

Through pliers and wrench Tighten the nuts in opposite directionsSo they do not move on the turn.

Then fix the bolt in the chuck screwdriver.

Close to the nut(Slit line) putting a hacksawat and turn screwdriver.

As a result, fast enough fabric thins bolt in place of the saw.

This method of cutting the bolt, as opposed to simply sawing hacksaw, allows to shorten it without damaging the threads.