Nonstandard method linoleum neatly trimmed around the pipe.

The process of laying linoleum enough easy, so professional help few turns.

Usually Handyman themselves laid this floor covering and, of course, sometimes there are difficulties.

For example, at the stage of cutting linoleum question often arises: "How neatly trimmed linoleum around heating pipes? ".

This question has a simple answer, which discussed below.

Typically linoleum trimmed around pipes with a special knife or stationeryBut having no experience, do it for the first time can be difficult.

Then can come to the rescue non-standard, but simple way of fitting of linoleum to the pipe.

Let's start with the fact that the crop linoleum to the tube best just before installing baseboards.

In this case, the material is already have time to lie down and Cutting will be more accurate.

First thing tightly presses linoleum to the front of the tube and with a pencil We note the location of the center of the fold.

Then, a tape or a caliper measuring tube diameter.

AND tolerated in the resulting linoleum size, then We find the midpoint and mark it with a pencil.

Then select appropriate diameter to the pipe the crown of the tree.

underlay under the linoleum bar, Set in the center point of the drill markings and using a power screwdriver We do a round hole.

We can only exactly in the center make the cut from the edge to the circumference of linoleum and linoleum bed around the pipe.