The most common mistake when installing the polycarbonate.

Now almost all the greenhouses are closed cellular polycarbonate. Such popularity is due to the material is very simple.

Compared with other materials polycarbonate It has number of advantages. One of them is - easy installation.

At first glance, it seems that closed greenhouse cellular polycarbonate is very simple, so professional help few turns.

As a result, allowed annoying bugsWhich lead to significantreduction of service life polycarbonate.

To avoid thisBefore starting the installation better become familiar with the most common errors.

Incorrect orientation of the polycarbonate sheet in the space.

it One of the most common installation errors. It is due to material properties.

The point is that polycarbonate has hollow channels within its structure. If the polycarbonate sheet placed during installation perpendicular to the fall line, the inside these channels accumulated condensate.

As a result, the appearance of the coating deteriorates, and the condensate freezes in winter and

Polycarbonate can begin to break down.

Also, do not forget that the polycarbonate sheet only one side covered with a protective layer against UV rays (Protective film-shirts).

Therefore, if the fix list insecure side, he quickly turn yellow and begin to break down.

Improper fixing of polycarbonate sheets.

This is another common mistake when installing the polycarbonate.

If used for fixing of polycarbonate screws without washersThat is, a large percentage of probability, that the sheets throwing up a gust of wind.

The same mistake is rigid fixation of polycarbonate sheets.

When heated in the sun expands polycarbonate, it began to publish the unpleasant creaking and may become deformed at the fixing.