How to quickly and easily remove the gap between the laminate planks without disassembling the entire floor.

Very often during operationbetween boards laminate formed slitthat not only spoil the appearance of the floor covering, but also promote the penetration ofmoisture and debris under it.

BUT this is results to more serious consequencesSuch as creak laminate when walking and irreversible deformation Lamela.

To avoid this necessary to the formation of cracks immediately repair.

Especially because it can be done fast and easy with his own hands and deal with the whole floor will not have to. How? Consider the following.

Remove the gap between the boards can be laminated using simple devicesWhich can easily be done by hand.

For its production need small a piece of chipboard rectangular shape, which is necessary on the one hand a strip of double-sided tape pasted length of 8 - 10 cm.

Just for the manufacture of devices is fine any other similar materialHaving a flat and smooth surface.

After this simple device is ready, you can proceed directly to a repair.

To do this, the first step is to remove all of the gaps accumulated debris with a vacuum cleaner.

Then, remove the protective paper from the double-sided tape on the device and attach it to the board of laminate next to the slot.

Then using a hammer to knock on the device several times toward the gap.

laminate planks are moved quickly enough and the gap disappears.

We can only detach the device from the laminate and remove from him the remnants of double-sided tape.