Dim light remains illuminated after the light is turned off. There is a simple solution.
LED bulbseconomical energy consumption and have a long service life, Therefore, have been actively used instead of incandescent lamps.
And like all good, but sometimes at their operation there unusual. Light bulbs, even after turning off the switch,continue to shine dimly or blink.
This phenomenon not only annoying, but also shortens their lifespan.
therefore it is desirable to try to eliminate this problem.
Especially because to do this perhaps enough just. How? Consider the following.
CausesOn which the LED light continues to shine dimly or blink when the switch is off, may be different.
But more often the problem occurs when you use Illuminated switch.
The fact is that in the inner part of the switch is Light-emitting diodea current-limiting resistor.
Even when the switch through them anyway He continues to pass power and this is enough for the dull glow of the LED light.
In this case, to solve this problem in two ways.
The first of these cardinal.
Eliminate the dim glow lamps will switch to a replacement simple backlight embodiment without.
But not always have the desire to solve the problem in such a way, Especially since there are more a simple solution.
To do this, to dismantle the enclosure existing switch with illumination.
Then, using wire cutters or scissors needed cut wireThat goes to the resistor and can be mount the switch in place.