How to soundproof sewer standpipe. A popular way.

Currently, the replacement of sewer risers almost always served instead of the old cast iron pipes used plastic.

The new pipe is, of course, well, but We need to be alert to theThat sewage risers will make a noise.

This is a very simple explanation. Plastic pipe unlike iron practically not consume sounds (vibration).

each drain liquid produced neighbors from above will clearly audible. Sooner or later, these sounds are occasionally still will be annoying.

Therefore, it is better to make noise isolation of the riser at the stage of repairs. How? Consider the following.

To reduce noise in the stores now is a wide selection of different sound-absorbing materials (for every budget). I wrapped and ready to strut.

But but silence is no less important is also an aesthetic component. In this case, a box of drywall is a great solution to help "kill two birds with one stone."

We begin the process of noise reduction with striping on the walls, floor and ceiling.

Then, using scissors metal cut into the guide profile 27 * 28 to required sizes and secured with dowels
for road marking.

Profile of rack 27 * 60 do ribs to reinforce the frame.

For the use of sound insulation special acoustic plates or mineral wool.

Cut the plate so that they are included between the ribs (30 to 40cm) and tightly wrapped with their sewage risers.

Acoustic plates fix with plastic ties.

After that, the box sutured plasterboard and is ready for final finishing.