The most common mistakes when aligning the floor with their hands.

Recently, most of the floor alignment produced using self-leveling mixture.

This is a fairly simple and quick way to prepare the subfloor for laying the floor covering.

Therefore, during installation services professionals often do not go and fill their own produce.

As a result, mistakes which lead to unpleasant consequences until delamination screed.

To avoid this, consider the most common errors in the alignment of sex with his own hands.

Poorly prepared substrate.

Various cracks and chips, as well as dust, dirt and exfoliated base slices impair adhesion admixture with the floor base and the resulting screed may crack.

Therefore, you must carefully clean the subfloor before pouring.

Filling without primer.

The floor not covered with a primer layer before filling with high probability cracked or starts to flake off.

Because the undercoat provides good traction and a more uniform distribution of the self-leveling mixtures thereof.

Filling without assistants.

Self-leveling very quickly loses its plasticity, thus casting process should be carried out continuously. To carry it alone is very difficult.

A minimum of two people to ensure the continuity of the process.

Lack of barrier for the mixture.

If you do not make the barrier mixture begins to spread outside floods the room with all its consequences.