How to install a toilet bowl with his hands, so it does not wobble.

When installing the toilet is very important installation. Mistakes made during installation can lead over time to the fact that the toilet begins to wobble.

Therefore, it is important to establish high quality toilet.

This can be done entirely by hand. The main thing to know the features and process technology. On them will be discussed below.

The process of installing the toilet start with markings.

To do this, put the toilet in place, where it is planned to install it.

With the pen makes a mark on the tile through the holes for mounting the toilet.

Remove the bowl and proceed to drill the tile layout.

With the gun, using a drill down on the tile, at a low speed drill holes. The drill bit is not heated, boring place moistened with water.

Then, to expand the size of the holes in dyupeley drill drill on concrete.

The resulting holes cleaned of dust, paste and hammered dowels.

Then set the bowl into place and fasten the mounting bolts are not through.

This is necessary in order to make a "cushion" (lining) of silicone sealant between the tiles and the toilet to improve fixation.

In many ways, it is from this phase of the work depends on the stability of the bowl during operation.

Lifting the first one and then the other side of the toilet bowl seam sealing with silicone.

It remains only to tighten the fixing bolts to the end and put on their decorative caps.