Decorating the walls of plasterboard without frame and a profile with their own hands.

Align the wall during repairs have to almost always. The easiest and fastest way to do this is to furnish plasterboard walls without frame and profile. This method allows you to save time, space, space and cost for the purchase of building materials. In addition, this results in smooth walls ready for finishing.

Produce drywall finishing walls without frame easily by hand. The main thing to know the features and process technology. How correctly to do this? Consider the following.

The process finishes with plasterboard walls without frame begin with a careful preparation of the substrate. Remove from the walls of an old decorative finish (wallpaper, paint, etc.), purified using a brush and causes the dust primer.

Then, using the perforator and knead the solution a special nozzle mounting adhesive plaster Perlgips. Please be aware that the glue hardens quickly, so you need to mix a small amount, which will be immediately used.

Further, the adhesive pellets put on the wall at intervals of 30 cm in length equal to the size of the sheet of plasterboard to be glued.

Immediately after applying the glue is applied a sheet of drywall to the wall and presses it well. This is to ensure that the adhesive is evenly distributed between the sheet and the wall.

Then, using a level and align the sheet of drywall rules.

Subsequent sheets of drywall need to be glued in a staggered manner. Between the sheets is necessary to leave a gap of 1.5 cm for the adhesive filling.

In conclusion, I want to say that the method of fixing frameless plasterboard is not always applicable. If the walls have large swings, protrusions or severe depressions, as well as possible in the room sudden changes in temperature and humidity, it is necessary to stop the process at the other alignment walls.